Equipment

Mitsubishi unveils 2015 Diamana shaft lineup

Published

10 years ago

Jun 23, 2014

Few graphite shaft makers can claim the success of Mitsubishi Rayon’s Diamana shafts, which have been used to win more than 100 events on golf’s major professional tours since 2004. That makes it a big deal when the company tests a new line of Diamana shafts, as it is doing this at the Quicken Loans National.

The most well-known of the company’s Diamana shafts are its original S-Series and D-Series models, known as a “Blue Boards” and “White Boards,” respectively, and they’re used by a staggering amount of the world’s best players.

Tiger Woods uses the original Blue Board shafts in his driver and fairway woods, while Gary Woodland plays the Diamana S+ Series shafts in his driver and fairway wood. Jordan Spieth, on the other hand, plays an original Blue Board shaft in his driver and a Diamana D+ Series shaft in his fairway wood.

The new models are the second-generation of the company’s Diamana +Plus Series that are played by Woodland and Spieth. They’re called the S+ and D+ Series, and use new technologies that make the shafts a viable option for everyone from the best golfers in the world to the weekend player.

The profiles of the first-generation and second-generation Diamana +Plus series shafts are similar, which means that they should produce close to the same launch and spin characteristics for most golfers. There are material differences between the shafts, however, which will make the second-generation shafts a better fit for many golfers.

Mitsubishi Rayon’s second-generation Diamana +Plus Series shafts have a matte gray finish, making them a better fit for many of today’s colorful driver, fairway wood and hybrid heads. The first-generation Diamana S+ and D+ shafts had matte blue and black finishes, respectively.

The second-generation Diamana +Plus shafts expand the company’s Multi-Dimensional Interlay (M.D.I.) technology throughout the length of the shaft, where it was previously only used in the tip. That allows each shaft to be made about 3-to-4 grams lighter without affecting the shaft’s bend profile, said Mark Gunther, Mitsubishi Rayon’s vice president of sales and marketing. Unlike the original Diamana shafts, it also allows Mitsubish to tune the torque of each shaft to a specific flex, giving softer-flex shafts a little more torque and stiffer-flex shafts a little less torque.

What’s also new is that the the second-generation S+ Series shafts are counterbalanced, which means that they have a higher balance point that allows today’s heavier driver, fairway wood and hybrid heads to be played at a standard length or a longer-than-standard length without a drastic affect on swing weight.

The S+ Series shafts are slated to be released in more flexes and more weight options than ever before as well, with an emphasis on going lighter. Golfers will be able to get a 52-gram S+ Series (R and S flexes) for the first time, as well as more standard-weight options: a 62-gram model (R, S, X, TX), a 72-gram model (R, S, X, TX) and an 82-gram model (X, TX).

TX-flex shafts, which are available in each 62-gram, 72-gram and 82-gram shaft model, use special 46-ton carbon fiber materials that allow the shafts to be stiffer and have less torque than X-Flex shafts.

The D+ Series, which launches lower than the S+ Series, will also be available in a 52-gram model for the first time (R, S and X flexes), as well as a 62-gram model (S, X, TX), 72-gram model (S, X, TX) and 82-gram model (X, TX). It will not be as counterbalanced as the S+ Series shafts, however, because of its target audience. Golfers who tend to be a fit for the D+ Series often want their woods to have either a shorter length, heavier swing weight or both, which generally negates the benefits of a counterbalanced shaft.

Golfers looking for an aggressively counterweighted shaft from Mitsubishi Rayon will be pleased to hear that along with the company’s recently-released Fubuki J shafts, it will release a new Diamana M+ Series shaft, which is inspired by Mitsubishi’s original Diamana M-Series “Red Board” shaft. It’s the highest-launching of the three shafts and is expected to hit the PGA Tour for testing in October. It will be available in a 52-gram model (R, S), a 62-gram model (R, S, X, TX) and 72-gram model (R, S, X, TX).

Like the rest of the line, the M+ Series will be available in limited quantities this fall and will sell for about $300.

Click here to see what GolfWRX Members are saying about the second-generation Diamana +Plus Series shafts in our forum.

Your Reaction?

LIKE79
LEGIT20
WOW10
LOL8
IDHT7
FLOP7
OB5
SHANK15

Related Topics:Mitsubishi Rayon shafts

Up Next

Bettinardi hosts 7th Social, 300 putters quickly find new homes

Don't Miss

Spotted: Titleist 915 drivers

Zak Kozuchowski

13 Comments

brett w

Nov 18, 2014 at 7:39 pm

Anyone know what the torque is going to be on the D+ White 70 TX?

Reply Report comment
DENNIS C. BURNS

Jul 1, 2014 at 12:35 pm

WHAT DOES (X5CT) ON THE SHAFT MEAN? DOES IT MAKE A DIFFERENCE AND WHY.

Reply Report comment
- John Muir
  
  Aug 13, 2014 at 7:53 am
  
  Hi Dennis:
  From their FAQ page:
  
  The Mitsubishi Rayon logo is comprised of three diamonds. Diamond weight is measured in carats and there are 5 carats in one gram. Therefore these making signify the approximate shaft weight in carats. (e.g. 63 x5ct means 63 x 5 carats = 315 carats = 63 gram
  
  John Muir
  
  Reply Report comment
Mizunopure

Jun 28, 2014 at 2:22 am

I’ll take an O.G Blueboard for 90. Thank you!

Reply Report comment
billm311

Jun 26, 2014 at 9:05 am

I wish Mitsubishi would release lighter flexes in the heavier weights. My swing fits the whiteboard profile perfectly, but I usually can’t get maximum benefit from Diamana’s when it comes to weight v flex. Can I get a 60 Regular or 70 regular please?

Killing me.

Reply Report comment
Chuck

Jun 26, 2014 at 7:43 am

With all of the interest in heavier-weight shafts (including but not limited to Tiger Woods’ earlier move to a 103g Diamana), I sort of expected that if Mitsubishi was going to do anything new, that they would include such choices. Too bad that that appears not to be the case.

Reply Report comment
West

Jun 24, 2014 at 5:09 pm

The matte silver finish does look nice. But how do they stack up against the B and W series?

Reply Report comment
- Joe Golfer
  
  Jun 26, 2014 at 2:47 am
  
  I like that chrome ion plated finish that is just coming out. Not sure which version of the Diamana shafts it is though.
  If you read the FAQ’s (frequently asked questions) on the Mitsubishi Rayon website, it mentions that this particular finish has already been around in their Japanese market but hasn’t made it to America yet.
  
  @West asked how this article’s shafts stack up against the B and W series.
  I honestly can’t say, but the Mitsubishi Rayon website does discuss some of that stuff, so one can go there http://www.mitsubishirayongolf.com/product.php?cmd=thirddia&lang=en
  and look up the info and hope you can decipher all their lingo.
  Under the “products” section they list each of the types of shafts.
  Once you get to the shaft, you can read their description of what makes them different, and they provide their specs as well as an EI chart, which is their shaft bend profile from butt to tip.
  Hope that helps.
  
  Reply Report comment
  - west
    
    Jun 27, 2014 at 4:55 pm
    
    Thanks for your help, but the site doesn’t actually list these products.
    
    But after rereading, it looks like these 2nd gen shafts are really just counter balanced versions of the 1st gen shafts for the heavier, lower CG heads, and also with that MDI weave through out the shaft. Wonder how that will affect the “feel” of the shaft???
    
    Reply Report comment
Pingback: Mitsubishi unveils 2015 Diamana shaft lineup | Spacetimeandi.com
JJ

Jun 23, 2014 at 5:52 pm

Ummmmm Delish!!!!

Reply Report comment
Steve Barry

Jun 23, 2014 at 5:28 pm

I like the throwback look to the OG Blueboards and Whiteboards.

Reply Report comment
- Clemson Sucks
  
  Jun 24, 2014 at 4:24 pm
  
  +1
  
  Reply Report comment

Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Max Homa WITB 2024 (April)

Published

13 hours ago

Apr 15, 2024

GolfWRX Staff

Max Homa what’s in the bag accurate as of the Masters.

Driver: Titleist TSR3 (9 degrees, D1 SureFit setting)
Shaft: Fujikura Ventus TR Black 6 X

3-wood: Titleist TSR2+ (14.5 degrees, A1 SureFit setting)
Shaft: Mitsubishi Tensei 1K Red 80 TX

Check out more in-hand photos of Max Homa’s WITB in the forums.

5-wood: Titleist TSR2 (21 degrees @19.25, D1 SureFit setting)
Shaft: Fujikura Ventus Blue 9 TX

Irons: Titleist T100S (4), Titleist T100 (5), Titleist 620 (6-9)
Shafts: KBS $ Taper 130 (4-9)

Check out more in-hand photos of Max Homa’s WITB in the forums.

Wedges: Titleist Vokey Design SM10 (46-10F, 50-12F, 56-14F), WedgeWorks (60)
Shafts: KBS $ Taper 130 (46) KBS Hi-Rev 2.0 135 X (50, 56), KBS Hi-Rev 2.0 125 X (60)

Putter: Scotty Cameron T-5.5 Proto

Check out more in-hand photos of Max Homa’s WITB in the forums.

Grips: Golf Pride Tour Velvet Cord

Ball: Titleist Pro V1

More photos of Max Homa’s WITB in the forums.

Your Reaction?

LIKE7
LEGIT0
WOW0
LOL0
IDHT0
FLOP0
OB0
SHANK1

Whats in the Bag

Bryson DeChambeau WITB 2024 (April)

Published

14 hours ago

Apr 15, 2024

GolfWRX Staff

Driver: Krank Formula Fire Pro (6 degrees)
Shaft: Project X HZRDUS T1100 75g 6.5

Mini driver: TaylorMade BRNR Mini Driver (11.5 degrees @10)
Shaft: Project X HZRDUS T1100 75g 6.5

Unconfirmed. We are working to gather details.

5-wood: Krank Formula Fire

Unconfirmed. We are working to gather details.

Irons: Avoda Prototype (5-PW)
Shafts: LA Golf Prototype

Wedges: Ping Glide 4.0 (46-12S @45, 50-12S, 56, 60)
Shafts: LA Golf Prototype

Putter: SIK Pro C-Series Armlock/LA Golf Proto
Shaft: LA Golf C2L-180
Grip: JumboMax JumboFlat 17

Grips: JumboMax UltraLight XL

Ball: Titleist Pro V1x Left Dash

Your Reaction?

LIKE10
LEGIT2
WOW2
LOL0
IDHT0
FLOP0
OB0
SHANK0

Equipment

Accra launches new GX wood and hybrid shafts

Published

16 hours ago

Apr 15, 2024

Brian Knudson

Accra Golf shafts have long been synonymous with fitting, and the new GX line of driver, fairway, and hybrid shafts continues that legacy.

Since 2004, Accra has been making high-end performance golf shafts that use the latest in materials and design philosophy. Their group of around 350 fitters are some of the best and most highly ranked in the world. While you might see other brands on professional tours more often, there are plenty of touring pros using Accra products and winning.

Accra’s new GX line of shafts is designed to offer a consistent and accurate shaft to a wide range of players. The GX line consists of 3 different shafts in driver, fairway, and hybrid designs.

The Accra GX shafts are designed for fitters to dial in golfers to the perfect shaft for their swing. Accra included a ton of technology into the GX line including their S3 profiling, DyMatch, and Constant Flex technology. DyMatch has been Accra’s quest to ensure that all shafts in a family feel and perform similar from driver to hybrid or iron shaft. Typically shafts get stiffer as they go up in weight, but Accra’s Constant Flex keeps the flex of the shafts consistent so fitters and golfers can dial in the weight that the golfer need without have to work around a stiffer or softer flex. Accra worked with Cool Clubs to build out its S3 Shaft Profiling system that not only allows a quick and easy EI profile of any shaft, it helps with quality control to ensure shafts come out of production exactly as they were designed.

Accra GX Red 300 Series

GX Red is lowest launching and spinning option in the GX line. Driver shafts have fewer options with just the 360 and 370 models that come in at 63 and 71 grams. The GX Red is made for faster swinging, or stronger, players who require a stiff (M4) or x-stiff (M5) shaft for their swing. Fairway and hybrid models are also on the higher weight side with the fairway clocking in at 80g and 90g for the hybrid. Accra designed this series with one of the stiffest tip sections of any Accra shaft in the current line, and while it is built to control launch and spin, the Red 300 Series will still offer that smooth feel.

Accra GX Green 100 Series

If your swing usually works best with mid-launch and spin, then the GX Green 200 series might be the right shaft for you. Offered in more weight and flex options, you can get a GX Green in 52 grams and all the way up to 70 grams in regular, stiff, and x-stiff flexes. GX Green will give the player a smooth feel and transition from the handle down to the tip section while still providing great stability and consistency. Accra also focused on the energy transfer of this shaft, and golfers can see some increased ball speed compared to other shafts.

Accra GX Blue 200 Series

While the GX Blue 100 Series is the highest launching and spinning option in the GX lineup, it will still give golfers the control and consistency they need. Starting off at 40g, the GX Blue series puts an emphasis on lighter weight to allow players to swing the club faster, promoting more distance. Accra touts the stability of the GX 140 Blue driver shaft by stating that some long driver competitors have put it in play to try and gain every MPH they can. Matching fairway and hybrid shafts are both on the lighter side at around 60g for the fairway and 65g for the hybrid depending on the flex.