Equipment
Matrix TPHDe shafts
Matrix’s new TPHDe shafts use the latest materials in a new construction that can improve ball speed, feel and stability, according to the company.
Like its predecessor, Matrix’s TPHD shaft, the TPHEe uses exotic materials such as Zylon, Boron and Gmat to stabilize the shaft without increasing weight or making the shaft feel stiffer.
[youtube id=”_JASvOxzjU0″ width=”620″ height=”360″]
In Matrix’s TPHD, the HD section, or 16-sided hexadecagonal internal platform, was located in the upper portion of the shaft. In the TPHDe, Matrix extended the HD section down the body of the shaft. According to Chris Nolan, Matrix’s executive vice president for global operations, that allowed the company to make improvements to the shaft’s design that were not possible with the TPHD.
“In car terms, we’re trying to make sure the chassis is as stiff as possible,” Nolan said. “By extending the HD section, we’re able to increase stability without losing feel.”
The exotic materials and the construction of those materials, however, come at a cost. With a $1200 MSRP, the TPHDe is one of the priciest shafts on the market.
“We’re dealing with different raw materials that have different properties, and it’s a very technical process to get those materials to stay together,” Nolan said.
The TPHDe shafts offer a mid-launch, mid-spin trajectory and are available in weights of 50 grams, 60 grams and 70 grams in eight different flexes ranging from lady to XX-stiff.
They have a balance point that is about 0.5 inches higher (toward the butt section) than the TPHD, which allows golfers to retain traditional swing weights with today’s heavier club heads or build the driver to a longer finished length to increased club head speed.
Matrix’s TPHDe shafts will ship to retailers later this month.
- LIKE7
- LEGIT1
- WOW3
- LOL0
- IDHT1
- FLOP2
- OB1
- SHANK3
Whats in the Bag
Daniel Berger WITB 2024 (April)
- Daniel Berger what’s in the bag accurate as of the Farmers Insurance Open. More photos from the event here.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 7 X
6-wood: TaylorMade Qi10 Tour (21 degrees)
Shaft: Fujikura Ventus Black 8 X
Irons: TaylorMade P770 (3), TaylorMade Tour Preferred MC 2011 (4-PW)
Shafts: Project X Denali Blue 105 TX (3), Project X 6.5 (4-PW)
Wedges: Titleist Vokey Design SM9 (50-12F), Titleist Vokey Design SM10 (56-14F), Callaway Jaws Raw (60-08C)
Shafts: Project X 6.5 (50), True Temper Dynamic Gold Tour Issue S400 (56, 60)
Putter: Odyssey Ai-One Jailbird Mini DB
Grip: SuperStroke Zenergy PistolLock 1.0
Grips: Golf Pride Tour Wrap
Ball: Titleist Pro V1
Check out more in-hand photos of Daniel Berger’s clubs in the forums.
- LIKE3
- LEGIT0
- WOW0
- LOL1
- IDHT0
- FLOP0
- OB1
- SHANK0
Equipment
Heavy Artillery: A look at drivers in play at the Zurich Classic of New Orleans
What are the driver and shaft combinations of the best golfers in the world? For gearheads, it’s an endlessly interesting question — even if we can only ever aspire to play LS heads and 7 TX shafts.
At this week’s Zurich Classic of New Orleans, GolfWRX got in-hand looks at the driver setups of a wealth of players.
Check out some of the most interesting combos below, then head to the GolfWRX forums for the rest, as well as the rest of our galleries from New Orleans.
Rory McIlroy
Driver: TaylorMade Qi10 (9 degrees @8.25)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride MCC
Alex Fitzpatrick
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride MCC
Daniel Berger
Driver: Ping G430 LST (10.5 degrees @9)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride Tour Wrap
Rasmus Hojgaard
Driver: Callaway Paradym Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX
Grip: Golf Pride MCC
Alejandro Tosti
Driver: Srixon ZX5 Mk II LS (9.5 degrees @10.5)
Shaft: Project X HZRDUS T1100 75 6.5
Grip: Golf Pride MCC Plus4
James Nicholas
Driver: Titleist TSR3 (8 degrees, A1 SureFit setting)
Shaft: Fujikura Ventus TR Blue 7 X
Grip: Golf Pride Tour Velvet
Kevin Streelman
Driver: Titleist TSR3 (10 degrees, D1 SureFit setting)
Shaft: Fujikura Ventus TR Black 6 X
Grip: Golf Pride Tour Velvet
Sang-moon Bae
Driver: Callaway Paradym Triple Diamond (9+ @8)
Shaft: Fujikura Ventus Blue 6 X
Grip: Golf Pride Tour Velvet
Russ Cochran
Driver: Callaway Paradym Ai Smoke (9 degrees)
Shaft: Graphite Design Tour AD TP 6 X
Grip: Golf pride MCC Align
MJ Daffue
Driver: Callaway Paradym Ai Smoke Max (10.5 degrees @9.5)
Shaft: Project X HZRDUS Smoke Green RDX 65 TX
Grip: Golf Pride ZGrip Cord Align
Check our more photos from the Zurich Classic here.
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
Whats in the Bag
Rasmus Højgaard WITB 2024 (April)
- Rasmus Højgaard what’s in the bag accurate as of the Zurich Classic.
Driver: Callaway Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX
3-wood: Callaway Ai Smoke Triple Diamond Prototype (16.5 degrees)
Shaft: Mitsubishi Tensei 1K White 80 TX
Utility: Callaway Apex UW (21 degrees)
Shaft: Mitsubishi Tensei AV Raw White 85 TX
Irons: Callaway Apex Pro (3), Callaway X Forged (4-PW)
Shafts: KBS $-Taper 130
Wedges: Callaway Jaws Raw (52-10S, 56-10S, 60-06C)
Shafts: KBS Tour 130 X
Putter: Odyssey Ai One Milled Eight T DB
Grips: Golf Pride MCC
Check out more in-hand photos of Hojgaard in the forums.
- LIKE3
- LEGIT1
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole3 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole3 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole3 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole1 week ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
xboxkilla
Jul 22, 2014 at 2:50 am
If you really want a $1200 shaft, but for way less than these guys are charging- go with a Penley shaft. They sell them on their site and the designer can be contacted almost anytime to answer questions-
check out the ET2 on there-
http://www.penleysports.com/products/penley-et2-shaft/
TheLegend
Apr 20, 2014 at 5:28 pm
lol nice trying to save this guy zak. He should never talk again. But you did a good job trying to find out what these shaft actually do better. But he had no real answer.
Zak Kozuchowski
Apr 20, 2014 at 7:43 pm
Guys,
I think you’re being a little hard on Chris. It was an impromptu interview about a very complex shaft. He’s an extremely kind, knowledgeable guy, and the fitters I speak to on a regular basis praise Matrix’s products as some of the best at creating a little extra ball speed.
Shaft companies spend a lot of time trying to explain their products to the masses, but the only real way to know how each will affect your performance is to find a custom fitter who stocks a lot of shafts and hit them for yourself. Most good club fitters will work within their customer’s budget, giving them several options at different price points. The TPHDe is certainly not for everyone, both in its cost and profile, but fitters such as Modern Golf in Toronto sell quite of few of them. To each is own.
brad
Apr 17, 2014 at 7:19 am
In his defense, it is quite difficult to push the tech boundary…these things are pricey in the beginning, but as it takes hold and materials and processes become more common, we’ll see similar shafts at “reasonable” prices. Remember, none of our wives or girlfriends understands why the thousand dollar irons we play are any better than the irons she saw at Target. If it were anyone but Matrix, I would call BS, but they’ve never let me down. Now we wait…
west
Apr 17, 2014 at 2:40 pm
Umm it’s not the price that I’m surprised by. Yes, the materials and processes used to make this shaft actually justify its cost. This shaft is like the Lamborghini of golf shafts, and while not everyone can afford an exotic or needs the performance of an exotic, it’s the people with excess cash who can justify the self indigence, no questions asked. What shocks the hell out of me is this “executive’s” piss-poor ability to market his company’s product. If I didn’t already know all the tech about golf shafts, and was just an average Joe golfer in the market, after seeing this interview I would not have any confidence in the TPHDe line or Matrix as a company. Just surprises me how unprepared this guy was to pitch his product…
west
Apr 17, 2014 at 4:04 am
This guy is the VP of operations? Seriously??
R
Apr 17, 2014 at 12:19 am
Gotta say I wasn’t impressed with this guys interview. Zak had to come in at the end and kind of bring some positivity back to it.
Nick
Apr 16, 2014 at 7:16 pm
For $1200 Im taking another golf vacation instead.
Petercybulski
Apr 16, 2014 at 7:42 pm
Well said
Petercybulski
Apr 16, 2014 at 5:17 pm
Gonna put those bad boys in my woods and irons!!!
Xreb
Apr 16, 2014 at 4:39 pm
You can see the guy struggling to explain the price point of the shaft, although I give him credit for keeping the BS to a minimum !