Connect with us

Equipment

Review: Adams XTD Forged Irons

Published

on

Pros: A forged blade-type iron with a little bit of a size advantage for extra forgiveness. Tungsten weighting offers excellent feel, and the presence of KBS C-Taper shafts and Iomic grips as standard options reinforces the XTD Forged’s status as a “player’s iron.”

Cons: All the highfalutin standard features do make a set pretty pricy ($1100 MSRP). Also, the irons are in a middle ground between “player’s blade” and “player’s cavity back,” which might be awkward to some.

Bottom Line: The XTD Forged irons hit the forged iron “sweet spot” splendidly, combining the workability and feel of blades with the enhanced forgiveness of cavity backs, thanks to the Cut-Thru Slot.

Overview

Adams Golf has long been regarded as principally a maker of good hybrids and fairway woods, from the original Tight Lies on down to 2014’s brand-new PRO hybrid, but they are coming up in the world in terms of drivers (more on that here) and, yes, irons.

Enter the XTD Forged irons, which blend the traditional size, shape and feel of blade and “player’s cavity back” irons with the more technology-forward trend that has emerged in the last couple years of golf equipment development. Adams took the basic head shape and thickness of a blade, enlarged it somewhat and added the two recognizable technological features: tungsten weighting and what Adams calls a “Cut-Thru Slot.”

post-1-0-57280000-1378588394_thumb

The general idea of the Cut-Thru Slot is that that space just behind the clubface — be it for a driver, fairway wood, hybrid or iron — creates a “floating face,” which enlarges the sweet spot, even on a traditionally less-forgiving sort of club such as a forged iron. The feature also helps lower the center of gravity, which produces higher-launching shots that generally do not suffer from runaway spin numbers.

The aforementioned tungsten weights also sit on the sole of the XTD Forged irons and work together with the Cut-Thru Slot to optimize each iron’s center of gravity which, once again, helps produce desirable launch and ball speed.

adams golf irons 2014

Adams XTD 4 iron pictured above

It should also be noted that the XTD Irons ($1099) come standard with the popular KBS C-Taper shafts and high-end Iomic grips. The irons are also available with Aldila’s RIP Tour 115-gram graphite shafts in R, S and X flexes for $1199.

For no upcharge, golfers can add Adams’ popular Dhy 3 or 4 hybrids, which can be substituted in the place of an XTD Forged 3 or 4 iron.

Screen Shot 2014-03-20 at 1.56.40 PM

See the discussion and gallery of the full Adams XTD line in the forums.

Performance

There is palpable synergy among all facets of the XTD Forged irons. As a result, they constitute a set ideally suited to a player who may have reservations about playing “true blades” but still wants as much of the two best features of blades as possible: clear feel on different qualities of contact and wide shotmaking potential. High draws, low fades and all shots in between can be coaxed out of these irons by the skilled player.

adams xtd forgedadams xtd forged iron 2014adams xtd ironsadams xtd forged 2014

Click the images above to enlarge

Shots produced by the irons pass the eye test handily: I noticed somewhat higher launch and good, stable ball flight when hitting shots with them both on the range and on the course. Even the long irons, when struck solidly, held firm greens. If I needed to hit a punch shot, the irons were equal to the task.

The good aesthetics of shots I hit with these irons was, happily, confirmed by the numbers they produced when I tested them on a launch monitor at Myrtle Beach’s PGA Tour Superstore location:

Ball speed / launch angle / spin rate / distance

8 iron: 111 mph / 19.4 deg / 7,055 rpm / 159 yds

5 iron: 126 mph / 12.2 deg / 4851 rpm / 200 yds

The Cut-Thru Slot and tungsten weighting in these irons were especially noticeable on shots with the longer irons. Slight misses on the heel and toe yielded little in the way of lost distance, as did shots where I made slightly thin contact.

adams xtd forged irons

Photo above is a raw XTD head showing the multi piece construction with floating face and tungsten inserts to lower the center of gravity. 

See the discussion and gallery of the full Adams XTD line in the forums

Looks and Feel

Many club manufacturers stay very traditional when it comes to forged cavity back and blade irons. But seeing as Adams put a bit more technology into XTD Forged series, they are decidedly more modern looking. This is not to say they are gaudy or ugly, but they will certainly never be confused with your dad’s old Hogan Apexes or Wilson Button Backs.

For starters, the clubhead has a somewhat matte finish, where most players’ irons — blades and cavity backs — tend to have chrome or satin finishes. The C-Taper shafts echo the look of the heads: matte steel rather than chrome or satin, which is modern and stylish without being ostentatious.

adams XTD forged iron review

The XTD Forged clubheads are a little larger than those of many other irons in its peer group, but not so much so that they look boxy. Their amount of offset is closer to that of forged cavity back irons than true blades. The topline is thicker than one would expect from a true blade, but again, certainly not more so than most forged cavity back irons.

adams XTD Forged iron

The top lines of the XTD Forged irons strikes a balance between thin and thick.

Feel-wise, there are no negative surprises with the XTD Forged irons. If you hit a shot solid, you will know it and you will love it. If not, well, that’s forged irons for you. Good players would not have it any other way; feedback in irons is important, after all. These irons will not unduly muffle contact on any part of the face. If you love the sensation and slightly higher-pitched “click” of contact with forged irons, you will enjoy the XTD Forged.

Adams XTD forged iron reviewadams golf 2014 ironsadams golf forged irons 2014adams golf forged iron

The Takeaway

With the XTD Forged irons, Adams continues to establish itself as a major player in the irons category for lower handicappers. If you want to reap the agreed-upon benefits of forged irons — trim clubheads, easily discernible feel, shot workability — but are not ready to take the plunge into full-on blades, these irons deserve your serious consideration.

Adams XTD forged iron review

The XTD Forged irons come standard with one of the most popular steel shafts in golf, as well as high-end Iomic grips, which contribute to a higher price tag. However, the harmony of those big-ticket features produces a product that is worth a higher tariff for the ambitious golfer.

[wrx_buy_now oemlink=”http://adamsgolf.com/XTD-Forged-irons/DW-AL287.html” oemtext=”Learn more from Adams Golf” amazonlink=”http://www.amazon.com/gp/product/B00FXLF84E/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00FXLF84E&linkCode=as2&tag=golfwrxcom-20&linkId=XWOVYECUFUPPBDZA”]

See the discussion and gallery of the full Adams XTD line in the forums.

Your Reaction?
  • 115
  • LEGIT27
  • WOW16
  • LOL8
  • IDHT5
  • FLOP4
  • OB11
  • SHANK7

Tim grew up outside of Hartford, Conn., playing most of his formative golf at Hop Meadow Country Club in the town of Simsbury. He played golf for four years at Washington & Lee University (Division-III) and now lives in Pawleys Island, S.C., and works in nearby Myrtle Beach in advertising. He's not too bad on Bermuda greens, for a Yankee. A lifelong golf addict, he cares about all facets of the game of golf, from equipment to course architecture to PGA Tour news to his own streaky short game.

25 Comments

25 Comments

  1. Nathan

    Oct 16, 2015 at 3:44 pm

    Well my 8 iron is 155m that is 170 yards for all you lady swingers.

  2. Pingback: Adams Golf Xtd Forged Iron Set - Seguin Valley Golf Club

  3. paul

    Nov 15, 2014 at 1:20 pm

    Had thse for about 2 weeks, all i can say is awesome. They are sneaky long and have pushed my PW from 125 to 136 ! In fact Ive struggled clubbing due to the extra distance …Wow… Pricey I know but with Tour C-Taper shafts as standard you cant go wrong. Adams are onto a winner here but they are hard to get in he UK, if they had more PR the better players would love these> Ive had them all, Ping, TM, Titleist and Vega but these are the best….Highly recommended

  4. John

    Nov 13, 2014 at 3:35 pm

    I have been gaming these for approx.4 months and must saw that they really do live up to my expectations. They are a little forgiving but let you know when you get it wrong. That said they are accurate and consistent shot after shot and pretty easy to shape into pins. I can hit high and low, left and right with little difficulty. I do not understand why TM have BURIED this other than to focus on their own models – that must be it. Cant help but think that the new RSi’s have more in common with Adams than TM

  5. Travis

    Sep 28, 2014 at 9:03 pm

    I bought a set and changed out the shafts with a higher trajectory XP95. I took these to Dicks today and had a go on the simulator. The farthest I could get the 5i straight was 220, 6i 193, 7i 189. I turned around and said to the employee, really how much do you plus up the numbers so you sell clubs? I’ve never hit irons this long. I’ll hit the course later this week. I can say this…the actual iron head is heavy. I mean heavier than any other forged iron I have. I got a decent deal on ebay for 700 bucks or so.

    • brian

      Sep 30, 2014 at 2:39 pm

      I’ve been eyeing these for quite some time. Get back to us with the results once you have a chance to take them to the course. it would be much appreciated.

  6. Jase

    Aug 19, 2014 at 3:33 am

    TM messed up a good thing. Adams peaked with the CMBs, now they are in a oversize, offset, wasteland of players clubs. No one that buys in this market is looking for a clunker with more offset. Thanks industry for fixing something that wasn’t broke.

  7. ryan

    Apr 10, 2014 at 7:57 pm

    I tested these last week. I really liked the feel. 6i avg. 164 carry w/4692 spin rate. 114 ball speed at 15.7 launch angle. Also tested Mizuno JPX 825 pro, Taylor TP, Ping I25, Ping Anser, and XTD CC. These were the most consistent for me. 10-12 handicap.

  8. Kev

    Mar 26, 2014 at 3:32 am

    really 8 iron 159yds ! I’d be on tour if I hit irons that far

    • paul

      Mar 31, 2014 at 2:10 am

      160 for an 8 iron is not unusual. I have only a 100mph driver swing speed and My distance is 145-150 (not a strong loft on my 8i either). If someone swings at 110 they will be around 160 with an 8.

      • milo

        Jun 22, 2014 at 5:47 am

        If someone swings at 110 with an 8 iron then i would expect nearer to 200 yards! 110 would be the ball speed not swing speed.

      • Brian Delorme

        Jul 18, 2014 at 7:25 pm

        I’m around 96-98 MPH with an 8 iron. Hitting my 8 160 on a smooth swing. And to rip it 165 (but may suffer the hook on a full tilt rip) it’s all compression. I notice yardage difference even from ProV1 to ProV1X……

    • Brandon

      Apr 1, 2014 at 1:34 am

      My standard 8 iron at sea level is 163yds with misunderstood mp 57. Tour players don’t hit it that long.

  9. MT

    Mar 22, 2014 at 10:11 pm

    The obsession by TM to add a slot to everything ruined the feel of these heads.

    • Martin

      Mar 24, 2014 at 9:48 am

      I absolutely agree. I hate the feel of the Taylormade irons with the slots in the heads. They go farther, but the feel is horrible. I was afraid this would happen.

      • Dave

        Mar 24, 2014 at 1:52 pm

        Glad I bought CMBs when I could.

        • Kev

          Mar 26, 2014 at 3:31 am

          Yep me too waited 2 years and got a brand new set at silly money, makes you woneder how they start off such a high price tag

    • Dan

      May 3, 2014 at 3:51 pm

      It was actually Adams technology from the getgo…Taylormade bought the company prior to a lawsuit over this slot technology. They said with their purchase that adams had to wait a year to put these irons out while Taylor put out the RBZ irons.

  10. Tom Duckworth

    Mar 22, 2014 at 9:40 pm

    I wonder if these launch much like the Speedblades? Kind of reminds me of a CMB with a cut-thu slot. I hope TM lets Adams keep on being themselves.

  11. The dude

    Mar 22, 2014 at 7:35 am

    Are those distances off TM on carry?…..with your driver CHS…hitting an 8 iron 159 seems high

    • Chris

      Apr 23, 2014 at 5:45 pm

      I hit my 7 iron 150, and I’m 56 yrs old and a 25 handicap, so I don’t agree with all the doubters regarding the distance of that 8 iron.

  12. LorenRobertsFan

    Mar 21, 2014 at 12:37 pm

    Another 4.5? Guess everything is good!

    Wish they weren’t so expensive, even through PUD. Seen slightly used sets on the BST for <$600

  13. Evan

    Mar 21, 2014 at 12:03 pm

    I really wanted to love these considering the stock shafts/grips and the club is beautiful. Of the 2014 players offerings I hit these the shortest and the least consistent. I think the shaft is too much for me to handle, would love to try with the graphite offering but they did not have that option to test neat me.

    • paul

      Mar 21, 2014 at 2:48 pm

      I swing driver between 100-105 mph, and I found the regular flex ctaper was a better fit then stiff. I play titleist 710 CBs, and these felt better and went a few more yards I found. Loved em. I would sell my irons right now and buy these but I just bought aerotech shafts and my equipment budget is done for the year.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

TaylorMade SIM and SIM Max driver review

Published

on

New for 2020, TaylorMade has launched the new SIM driver family. First the lower spinning SIM then a more forgiving higher spinning SIM Max and a SIM Max D head to help draw the ball for those that need it.

We have seen the tour players using all three of the SIM drivers.

Technical Details

The SIM, SIM Max, and SIM Max D drivers from TaylorMade feature an asymmetric sole shape as well as a redesigned Inertia Generator. The asymmetric sole shape of the drivers is designed to reduce drag while providing faster clubhead speed, with the redesigned Inertia Generator redistributing weight at the very low-and-back portion of the club in a bid to provide improved forgiveness.

The SIM Max D clubhead contains a heel-bias internal weight with a topline masking to make the clubhead look more open at address to help golfers who struggle with a right-miss.

Other features of the SIM, SIM Max, and SIM Max D drivers includes a speed injected twist face, inverted cone technology, a thru-slot speed pocket, multi-material construction and an adjustable loft sleeve.

Exclusive to the SIM driver is sliding weight technology which allows face angle and flight bias preferences of up to +/-2° loft change and up to +/-20 yards of draw-fade bias.

(Top Left to Right) 2020 TM SIM Max & 2019 TM M6, (Bottom Left to Right) 2020 TM SIM & 2019 TM M5

Reviews

Here are the individual reviews from GolfWRXers’ trip to The Kingdom.

Tester: Rob “osubuckeyes691

I’ll start by saying this. SIM is very good. It’s not a magical 30 yards like everyone is talking about here. That comes from being properly fit. But it is good, and with a proper fitting I’d be shocked if you couldn’t find at least slightly better numbers with SIM over any gamer you have.

My current set up is a Callaway Epic Flash SZ Double Diamond with a Fuji Ventus Black 6x. LOW LOW LOW combo…and I still hit it high haha. I live in the low to mid 170s ball speed with spin sometimes getting up to 2700 2800. Drives I hit well, spin around 2100. My miss is a big push slice.

But it is good, and with a proper fitting I’d be shocked if you couldn’t find at least slightly better numbers with SIM over any gamer you have. -Rob

I ended up being fit in to a SIM 9* with the new KBS Tour Driven 70 Category 5. This shaft is super interesting. It’s really hard for me to describe but it has feel, and a lot of it. Spin dropped to about 2400 on my miss right and really, that’s what I was hoping would happen. I wanted something that when I missed, wouldn’t lose me 30 yards. We put the weight in the heel and it really did help straighten out the miss. Huge advantage for me. I knew as someone who swings 120ish I wasn’t going to pick up 20 yards. I wanted to reduce my miss and that’s exactly what SIM was able to do for me.  Here is a link to his post in the forums.

Tester: Will “fillwelix

For my driver fitting, I was with Perry, who was a blast to get to work with. I started by hitting my gamer on Trackman, talking with Perry about what my misses usually are, and what I wanted to get out of the fitting.

I usually don’t have a problem with distance so I told him the biggest thing I was looking for was a tighter dispersion. I don’t have the trackman numbers yet but with my gamer, I was averaging about 110 club head speed, 160-something ball speed, 270-275 carry, 285-290 total. Launching a bit too high but spin was okay.

The thing was seriously nuclear. My club head speed bumped up only about 1 or 2 MPH, but the launch and spin were incredible, as well as ball speed. I topped out at 170 ball speed, which I had never gotten before. -Will

We tried the 10.5 SIM in a Ventus Black 6x, and he gave me a couple tips in my setup, because my AOA was something like 4 or 5 degrees up. The thing was seriously nuclear. My club head speed bumped up only about 1 or 2 MPH, but the launch and spin were incredible, as well as ball speed. I topped out at 170 ball speed, which I had never gotten before. Carrying 295-300, total of 315-320. One shot carried the fence of the driving range at The Kingdom.

Spent some time going through different shafts to see if there was an improvement, played with weights, etc. but the best numbers were with the 10.5 SIM with Ventus Black 6x and the weight all the way in the toe, because my miss is usually left. Here is a link to his post in the forums.

Tester: Nick “n_rones

I started off with my fittings working with Joe. After some warmup we started with the drivers. Coming in I was playing a Srixon Z785 with a Hzrdus black 6.5 70 gram shaft at 45 inches.

I’m a really tough fit because I have an unusual swing and hit down on the ball heavily with every club. My AOA with the driver was between 5 and 7 down which is pretty nuts I always knew I hit down on it but not that much. I’m still waiting on the trackman date to be emailed to me but with my own driver I was somewhere in the neighborhood of 109 swing speed with a launch angle of 4 degrees and 4000 spin (Ridiculous I know right).

I was able to take it on the course with me that afternoon and hit 12-14 fairways a new record for me and ever ball was easily 15-20 yards longer than I was used to. -Nick

His main goal for me was to get launch up and spin down. The first club he handed me was the Sim 10.5 turned up to 11.25 with a Graphite design IZ 7x. Instantly my launch angle increased and spin dropped. We then went through a few other shafts like graphite design ad di 7x. We came back to the IZ and with a quick change in tee height we ended up where we wanted. We knew with my angle of attack we were never going to get me to super low spin and high launch we just wanted to get it to a manageable number.

By the end of the fit I was hitting the sim with the iz under 3k spin with a couple down at 2500 and 9 degree launch increasing my carry from the 244 range up to the 260-265 range on good swings and we neutralized my cut massively. I was fortunate enough to finish my fit while other guys were still busy so we went right into the build shop and he built me my driver on the spot and gave me a super cool kingdom exclusive headcover. I was able to take it on the course with me that afternoon and hit 12-14 fairways a new record for me and ever ball was easily 15-20 yards longer than I was used to. Most of that is me never being through a proper fitting before but a big factor was I was able to get into the sim head with high loft but it was a great spin killing head for me. Here is a link to his post in the forums.

Tester: “jimbonecrusher”

I am one that gained a good bit of ball speed from getting fit for the SIM driver. My gamer is a Titleist 915D3 9.5* with a Rogue Silver 70X. I wasn’t fit for the driver as I just bought the parts off of the BST. I always felt that I lost yardage due to high spin. The Trackman didn’t lie as I was getting 166mph ball speed and 3000 rpm of spin on well-struck shots. Where this posed a problem was when I was off-center, the ball would be a high right spinner that would lose a lot of distance. 

Where I saw great gains was in dispersion. TwistFace just flat out works. Toe shots came back to closer to center, and heal shots faded right back towards center. I also didn’t lose as much yardage. I did pick up about five mph in ball speed. There are a plethora of reasons for this gain and the resulting 20 yard gain in ball flight.

Some could attribute the gain to almost 30 feet of height in ball flight. It could also be because there was 300 less RPM, or over a degree increase in launch angle. Either way, it has proven to me that getting fit by a knowledgeable fitter is crucial. This is the first time that I have been fit for a driver. All the expectations of mine going into this fitting have been met.

The SIM is forgiving. The SIM is aerodynamically superior to what I have been playing. The SIM just flat out performs for me because it doesn’t balloon, it is forgiving on mishits with good direction and ball speed, and it reduced my spin rate. – 

The sounds of the SIM line is amazing. The solid “thwack” sound it makes at contact is extremely welcoming. Gone are the days of high pitched aluminum baseball bat sounds. Now, some sounds just sound perfect to me. Johnny Wunder posted a video on Instagram of me hitting a driver, and you can hear the sound. Here is a link to his post in the forums.

Your Reaction?
  • 13
  • LEGIT2
  • WOW1
  • LOL1
  • IDHT0
  • FLOP0
  • OB1
  • SHANK6

Continue Reading

Equipment

Building the perfect half set

Published

on

Beyond physically putting clubs together, one of my favorite games to play is trying to build the ideal half set, and taking it out for some testing on the course. The goal is to see how few clubs I can play with before it becomes a detriment to my game and my scoring—while still having fun trying to hit all kinds of creative shots along the way

Many golfers have, at some point, played the “three-club challenge” (three including a putter), but that often becomes an exercise in caution and course management instead of what many would consider a usual round of golf. Although from the conversations I’ve had with golfers about trying out an extremely reduced set, the consensus generally ends up at, “I shot one of my best scores in a long time.”

I’m not sure how that sentiment potentially relates to handicap or not, but one way or the other, it’s a great way to lighten the load and have some fun thinking differently about your shots.

My ideal half set consists of 7-8 clubs including a putter, but in some cases, I will take it all the way down to 5-6. I love having the option to play with a full set and most times do, but I have gone weeks playing only with my half set and don’t see a noticeable variation in my scoring.

It actually makes me question why I carry a full set and in the grand scheme of golf. I think it would be one of the most entertaining experiments to have a PGA Tour event where players are limited to seven clubs. It would have the potential to make gearheads and the general fan engage in an interesting conversation.

Whatever way you choose to build your set, this is a quick start guide to play your best half set golf.

Thinking Your way Through Building a Half Set

  • The Putter: This is the one club that probably isn’t going anywhere (unless you are a virtuoso putting with a bellied wedge). You are going to be using this club on every hole, and depending on your comfort level hitting certain shots, you might end up using it further off the green than normal—cheers to the imagination! Build out from here, because shots inside 100 yards are still going to take up the majority of strokes on your card, and your putter is going to save you shots.
  • The “Wedge”: Remember that it wasn’t until the last generation of golfers that players started using a lob wedge. Tom Watson famously never put one in the bag and only carried up to a 56-degree. The ideal loft to start your set with is 52-54 degrees, because you can still hit shots out of the sand if needed, and it’s a great club to still hit full shots with—something that many golfers struggle to do with a lob wedge.
  • Your “Go-To” Shot: I think most golfers agree that trying to get more out of a club distance-wise often ends with less than great results. This is why as you go through your set and start to pick clubs, it’s important to think about your favorite go-to shots. You want to do everything you can to avoid standing over a ball trying to manipulate a club because you don’t have “that distance” in the bag. This is hugely important when you realize that close to 90 percent of hazards are placed in front of the green or target areas and being able to get over comfortably should be priority number one.
  • Know Your Iron Lofts:  Most modern sets have 4-5 degrees between each club, but as you get to the longer irons, even towards the middle of the set (7-iron to 5-iron) loft gaps can get smaller quickly, and for some this can equal a diminishing point of return on distance gapping. Don’t just grab every other iron, take a few minutes to think about the carry distance of each club, because that’s going to be important.
  • A Driver is Still Important: We all cant be Henrik Stenson with a 12-degree 3-wood we hit 300 yards. Unless you have plans to go truly minimalist, keeping a driver in the bag is a good idea. It is the largest and most forgiving club off the tee and will help put you into places that will make second shots a lot easier.
Your Reaction?
  • 153
  • LEGIT4
  • WOW1
  • LOL1
  • IDHT3
  • FLOP2
  • OB0
  • SHANK2

Continue Reading

Equipment

What GolfWRXers are saying are the top-3 underrated blade head designs circa 2005

Published

on

@jfp2112

GolfWRXers have been discussing the top-3 underrated blade head designs circa 2005 after forum member ‘8620’ created a thread with a desire to “build a set that starts with a ‘retro’ blade head, that incorporates a modern shaft (Nippon Modus Pro 130)”. Our members have weighed in on the subject, with some inspired by ‘8620’ to follow suit in his project.

Here are what our members are saying on the subject, but make sure to check out the entire discussion and have your say at the link below,

  • Gopher68: “Bridgestone J33 blades.”
  • BCULAW: “Mizuno MP67. Awesome blade that never really caught on due to the popularity of its predecessor (MP33) and its sister offering (MP32). Also, the small ‘cut muscle’ gives it a bit of an old school vibe like the old Wilson bullet backs.”
  • Golfingfanatic: “OG Nike Forged Blades.”
  • cardoustie: “Bridgestone MB’s, love my J15’s.”
  • OldTomMorris: “I’ve got a set of mp-37 irons that I am putting TT DG AMT white S300 shafts in right now. Curious to see if I can keep the short irons lower than my current set of irons.”
  • Rapidcat: “This interests me as I played Mizuno SPL blades for a decade and still have the heads in very good condition, thinking about a reshaft for them to have some fun.”

Entire Thread: “Top-3 underrated blade head designs circa 2005”

Your Reaction?
  • 8
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB1
  • SHANK1

Continue Reading

WITB

Facebook

Trending