Equipment
True Temper releases lighter, longer XP family of shafts
Most golfers are familiar with the advantages of today’s game-improvement irons, which are helping golfers hit the ball higher and farther than ever before. But fewer are aware of the latest crop of lightweight “game-improvement” shafts, which can further boost a golfer’s iron play.
One top-rated model is True Temper’s new XP shaft family, which was chosen by leading iron makers Callaway, Mizuno and Titleist to be the stock shaft in each company’s flagship game-improvement irons, Callaway’s Apex, Mizuno’s JPX-EZ and JPX-EZ Forged and Titleist’s AP1 irons.
Greg Cavill, vice president of alloy engineering for True Temper, credits the performance of the XP shafts to their variable wall technology, which allowed engineers to manipulate the thicknesses of certain parts of the shafts to improve distance, performance and feel.
In the butt section of the shaft, for example, the walls were made thinner, which was a key to making the XP 95 as light as 92 grams, more than 30 grams lighter than True Temper’s famed Dynamic Gold shafts. But engineers used thicker walls in the tip section of the shaft, which added weight to help stabilize the region.
Above: True Temper’s XP 95 shaft has a butt diameter of 0.605 inches, while the 10-grams heavier XP 105 shaft has a slightly smaller butt diameter of 0.600 inches.
Engineers continued the give and take by changing the step pattern of the butt section of the shaft. Its steps were made longer than those in the tip section, making the butt section stiffer. The butt section was then further reinforced with another stiffening agent, a slightly larger outside diameter, which works with the shaft’s stiff midsection to force the tip of the shaft to “kick” at impact.
That kick is responsible for the shaft’s higher launch, which when paired with the added swing speed the lightweight shaft provides adds 6-to-8 yards more carry distance, according to True Temper robot testing.
True Temper’s XP 95 shaft, as well as the 10-grams heavier XP 105 shaft, have a balance point that allows iron sets to be built with traditional balance points. They’re available in R300 and S300 flexes, and cost $400 for a set of eight shafts (3-PW).
- LIKE14
- LEGIT0
- WOW1
- LOL2
- IDHT0
- FLOP1
- OB0
- SHANK1
Equipment
Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage
Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.
It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.
When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”
“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”
View this post on Instagram
According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.
Here’s what Rietveld told GolfWRX.com on Wednesday:
“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.
“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.
“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.
“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.
“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”
So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.
His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.
See more photos of Rory testing the BRNR Mini here
- LIKE10
- LEGIT0
- WOW0
- LOL1
- IDHT0
- FLOP0
- OB0
- SHANK1
It seems like the RBC Heritage is full of new gear to be spotted, and you can add TaylorMade’s P-UDI utility irons to that list.
We spotted a 17-degree P-UDI 2-iron in Nick Dunlap’s bag yesterday, and now have some photos of both the 3- and 4-irons. Nick has his P-UDI 2-iron setup with a Project X HZRDUS Black 4th Gen 105g TX shaft.
From what we can tell, this new P-UDI utility iron looks to have some of the usual TaylorMade technology as we can see the Speed Slot on the sole of the club for additional face flexibility. A toe screw is usually used to close off the hollow body design that will probably be filled with a version of TaylorMade’s Speed Foam that is present in the current iron lineup. This hollow body, foam-filled design should offer additional ball speed, soft feel, and sound, as well as an optimized CG for ball flight.
“Forged” is etched into the hosel, so we can assume that either the face, body, or both are forged for a soft and responsive feel. The club looks good from behind and at address, where we can see just a little offset and a topline that I would consider medium thickness. We don’t have the full details on what is under the hood or how many loft options will be available yet.
TaylorMade P-UDI 3-iron – 20°
TaylorMade P-UDI 4-iron – 22°
- Check out the rest of our photos from the 2024 RBC Heritage
- LIKE9
- LEGIT1
- WOW2
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
- Collin Morikawa what’s in the bag accurate as of the RBC Heritage. More photos from the event here.
Driver: TaylorMade Qi10 LS (9 degrees)
Shaft: Mitsubishi Diamana D+ Limited 60 TX (45 inches)
3-wood: TaylorMade Qi10 (13.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
Irons: TaylorMade P770 (4), P7MC (5-6), P730 (7-PW)
Shafts: True Temper Dynamic Gold Tour Issue Mid 115 X100 (4-6), True Temper Dynamic Gold Tour Issue X100 (7-PW)
Wedges: TaylorMade MG4 (50-SB09, 56-LB08), TaylorMade MG4 TW (60-TW11)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: TaylorMade TP Soto
Grip: SuperStroke Zenergy Tour 2.0
Grips: Golf Pride Z-Grip Cord
Ball: TaylorMade TP5x
- LIKE3
- LEGIT0
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
Dave Portnoy places monstrous outright bet for the 2024 Masters
John Daly stuns fans into silence with brutal opening tee shot on PGA Tour Champions
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
Scottie Scheffler WITB 2024 (March)
Photos from the 2024 Arnold Palmer Invitational
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Two star names reportedly blanked Jon Rahm all week at the Masters
Joaquin Niemann names 3 PGA Tour events he’d love to play each year ‘in a perfect world’
Spotted: Bettinardi irons at the Arnold Palmer Invitational
Collin Morikawa WITB 2024 (April)
Collin Morikawa what’s in the bag accurate as of the RBC Heritage. More photos from the event here. Driver: TaylorMade...
WITB Time Machine: Jordan Spieth’s winning WITB, 2022 RBC Heritage
At the 2022 RBC Heritage Jordan Spieth defeated Patrick Cantlay on the first playoff hole after nearly holing his greenside...
Jason Day WITB 2024 (April)
Jason Day what’s in the bag accurate as of the RBC Heritage. Driver: Ping G430 LST (9 degrees @10) Shaft: TPT...
Ludvig Åberg WITB 2024 (April)
Ludvig Åberg what’s in the bag accurate as of the RBC Heritage. Driver: Titleist TSR2 (9 degrees, D4 SureFit setting)...
-
19th Hole1 week agoDave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks agoThings got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole1 week agoTiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks agoReport: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole3 days agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole3 days agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks agoAddiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
-
19th Hole2 weeks agoAnthony Kim says doctors told him that he ‘may not have much time left’ ahead of LIV return
BrianK
Dec 4, 2013 at 10:09 pm
For all of the people who will read this article and be truly interesting in the shafts, you need to try them. Don’t listen to the people whining about prices and if their game will change by 10 strokes. These are really good light weight shafts. Very good feel, exceptional control, and a little added distance. I have a set of the XP 105 and I have been really impressed with the vibration reduction in them. Been playing graphite for years and this is the first set of steal shafts that haven’t caused soreness in my shoulder. Even hitting off mats was no problem for me, and that was huge. These are not your lightweight “noodle” shafts of the past, these are legitimate shafts for good players who want to go a little lighter.
Dan
Dec 1, 2013 at 3:30 pm
These shafts are only 26$ at golfsmith. Not sure where the 50$ came from.
True Temper
Dec 2, 2013 at 11:04 am
$50 per is MSRP meaning fit and installed. $25 as a component. Very much in line with other lightweight steel and far less than a lot of new graphite irons..
TTS
Pingback: Desde el tee: semana 48/2013 | Golf76.com
Andrew Cooper
Nov 29, 2013 at 4:35 am
Equipment being too expensive is a myth! Golf equipment is no more expensive now in real terms than it was 20 odd years ago, certainly in the UK., Mizuno, Ping irons e.t.c. back in early 1990s cost around £500. Callaway’s Big Bertha and GBB drivers were £200-£300 when they came out. In 2013, you can still buy a cracking set of irons for £500. New Drivers are more or less the same-and the clearance deals on older models can be half that. If you’re going for up-charge options, like these shafts, and/or always want the latest clubs, then obviously that’s going to cost.
For anyone new to the game, or short on cash, quality 2nd hand is the way to go. If you know what to look for, you could put together a great set for under £400.
Giancarlo Baxa
Nov 29, 2013 at 12:06 am
I’m so sick about hearing about all these new shafts, new models, new everything. The bottom line is players clubs have all been the same since the change from the old persimmons to metal woods. A pure ball striker can perform on the same level no matter what clubs he’s using. There is nothing else manufacturers can do within the rules of conforming clubs that will make one club play much better than another. Basically the only difference is cosmetics, as much as manufacturers want you to believe that there is for example, ” increased ball speeds, different COG’s etc, it all means nothing. Give it up people, stop changing equipment and start changing your swing.
Brian
Nov 29, 2013 at 5:11 pm
There is nothing farther from the truth than what you just said. Go spend some time reading about modern equipment and I’m willing to bet you’ll reevaluate that statement.
woot
Nov 28, 2013 at 4:11 pm
This is not a poor man’s sport, if you want to go cheap you can always buy the box sets from wal mart.
marko
Nov 29, 2013 at 1:06 am
Golf is a sport! And there fore should be affordable for ALL people.
Don’t think for one minute because you make more money than someone else that YOU are a BETTER person and that YOU deserve special treatment. There is NO place in this life for Elitestests like You!!
Really?
Nov 28, 2013 at 8:56 am
50 bucks a piece for steel shafts… I can find EVERY other steel shaft for cheaper than that… Even the KBS Customs are not 50 a piece.
Another OEM pricing themselves out of most bags.
_Hawk3y3_
Dec 1, 2013 at 8:55 pm
Anyone paying $50 per shaft for these is stupid, lazy, or both. I play XP 105 S300 in my 5-PW and found them as a set of 1-time pulls on e-bay. $35 shipped for the whole set, and I had the serial numbers verified by True Temper. They truly are wonderful shafts and play very similar to Dynamic Gold. Don’t pay MSRP…spend a little bit of time searching for a deal or two.
WP
Nov 28, 2013 at 6:42 am
On the other hand, for those ‘hacks’ that are willing to suffer the indignation of playing stock shafts, this is a good news story. I have the XP95 in my new AP2s, love them, and avoided the $25/per upcharge for PXi. A set of AP1 with XP95 could be considered a bargain.
Paul
Nov 28, 2013 at 11:46 am
Agreed, feel like I stole something after reading this article considering these are stock in the new ap1 and 2’s. I personally liked them better then any other lightweight shaft as well, pxi, steelfibres, etc. and no up charge, win-win.
John
Nov 27, 2013 at 10:34 am
The real question for me is will these $50 a piece shafts lower someone’s score or handicap! I think I know that answer – I think they are running out of real ideas to improve club performance but need a another new idea to sell us equipment we don’t need.
AJ Jensen
Nov 27, 2013 at 10:24 am
I don’t know that I want much ‘improvement’ out of my irons, in terms of distance. What I want from my irons is for them to go an exact distance and stop dead where they land.
Michael
Nov 27, 2013 at 8:18 am
50 US-Dollar für a stable lightweight steelshaft? For that money, I would opt for an Aerotech Steelfiber in the correct weight.
Kevin
Nov 27, 2013 at 2:27 am
50$ a shaft for 6-8 more yards? No thanks I’ll be back here using a 7 iron when you use an 8 for those prices
jgpl001
Nov 28, 2013 at 5:10 pm
There were many id..ts who were willing to pay $300+ when TM promised 15 yds with the RBZ, so what is the problem here?
True Temper just need to have a brass neck and marketing hype machine like TM and they could double the price
Giancarlo Baxa
Nov 29, 2013 at 12:08 am
exactly right
Marko
Nov 27, 2013 at 2:20 am
WOW! $50 bucks a shaft. This game is becoming to expensive.
Not going to grow the game at these prices.
$1000 for a set of irons?
$300-$400 for a driver?
$125 for each wedge?
$100-$300 for a putter?
$40 for a dozen balls?
Really sad.
Zach
Nov 27, 2013 at 2:52 am
Completely agree! I can see why so many are leaving the game! Add to that cost membership fees for club members or for an average hack the green fees. Really hate to see this happen to my beloved game!!!
Ross
Nov 27, 2013 at 6:34 pm
It’s always been the way of golf… I was pretty poor growing up had hand me down clubs (not good quality and went hunting for golf balls to play and sell to cover my membership) The looks you get are never of encouragement…. it 99.9% scorn and the game has an ego and will continue to pander to the rich. 400 dollar head on a 400 dollar shaft, in a 400 bag…
Buy second hand 24 months old gear… they big up the advances but its all marketing.
Longest driver i ever hit was a mp650 with a graffaloy prolaunch red shaft… 90 dollars on ebay!
Martin
Nov 27, 2013 at 8:37 am
And if you really want to get properly fitted clubs, using the clubfix for example, it starts to get really expensive. A friend of mine got fitted for a new driver in Sweden (this was a serious fitter who really checked the club after it arrived, and it was an aftermarket shaft) and he paid: 750 dollars for it… So in the US its much cheaper…
Ross
Nov 27, 2013 at 6:37 pm
Everywhere is cheaper than in rip off Britain… unfortunately where i live… we have the links though
Jack
Nov 27, 2013 at 10:08 pm
But income must be higher to offset, no?
Nick Messi
Feb 25, 2014 at 2:34 pm
Try living in Australia mate.
We get hammered left right and centre. Cars , housing , groceries , golf equipment , golf membership , green fees , private school fees ……. the list goes on and on.
Christopher Kee
Nov 27, 2013 at 2:15 pm
I agree. It’s $2,500 for clubs/bag/balls/shoes to get out on the course if you purchase new. Thank god for ebay!
Corrie-Lynn's dad
Nov 28, 2013 at 10:55 am
The game of golf has been expensive as long as I can remember.
marko
Nov 29, 2013 at 1:15 am
I can remember when $500 would get you a complete set. Not that long ago. When the tradition of golf was respected. Now they (OEM) just want to find a new way(HYPE) to seperate you and your money. Big heads,graphite shafts, and the change in the golf ball has ruined the GAME of golf. It’s no longer a game of skill. It’s just boom and gouge. Where is Payne Stewart. RIP.