Connect with us

Equipment

Scotty Cameron to open a public putter studio

Published

on

Titleist putter maker Scotty Cameron will open a public putting studio in Encinitas, Calif., GolfWRX has learned.

For years, Cameron has had a private putter studio in nearby San Marcos that has functioned largely as a place for touring professionals to be custom fit for a Scotty Cameron putter. The intent of the public putting studio is largely the same, sources say, but it will offer putter-fitting services to the general public.

Cameron, 50, joined Titleist as a putter maker in 1994. Since that time, he has become the most prolific putter maker in golf, creating the putters that were used to win two out of the four major championships in 2013 (Adam Scott, The Masters; Jason Dufner, PGA Championship). Tiger Woods and Rory McIlroy have also used a Scotty Cameron putter in each of their combined 16 major championship victories.

Cameron’s retail line of putters fetch prices between $299 and $399 in the United States, making them some of the priciest in golf. But that’s nothing compared to the prices collectors assign to his “tour-only,” limited-edition and one-off putters, which can sell for as much as $20,000.

That fervor for Cameron’s products, which has held strong for more than a decade, is likely one of the driving forces behind the opening of the public putter studio, as many Cameron enthusiasts are willing to pay a premium for anything associated with the brand.

956b75a906bfc9e19c5f5a4b207df651-600x400

Above: Scotty Cameron putters from the 2013 PGA Merchandise show at the “Table Rock” display. They sold out quickly, despite their four-to-five-figure price tags.

It is doubtful that the Cameron would decide to sell any of his most sought after tour-only, or “Circle T” putters through the public putter studio, as he has resisted selling any of those putters through retailers in the past. However, Cameron had successfully sold limited-edition merchandise such as apparel, ball markers, head covers and putter grips through his website for years, and it would make sense that those items would line the walls of a public putter studio.

Titleist is yet to make an announcement about the public putter fitting studio, which sources say is expected to open sometime in 2014.

Your Reaction?
  • 0
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

35 Comments

35 Comments

  1. Conrad

    Nov 18, 2013 at 1:37 pm

    I sent my Putter to the Custom Shop and It came back the same length. Ie: only half the work was done. And when I asked them to remedy this and that I didnt want to send my putter off again they said no deal. I HAD TO send my putter back… Horrible customer service.

    • Nice

      Jan 22, 2015 at 2:13 am

      Did you want them to come to your house to fix it?

  2. Ponjo

    Nov 10, 2013 at 4:31 pm

    Wonder if the UK will get a Scotty Studio. I won’t hold my breath for that 🙂

  3. Mike M

    Nov 7, 2013 at 8:09 pm

    I think is great, as a huge fan of scotty and somewhat of a collector, i think this is great for us fans to be fit by the best with the best. scotty fans will pay for anything to be in “THE HOUSE OF SCOTTY” hopefully open before february 2014 !

  4. j diz

    Nov 6, 2013 at 4:36 pm

    my putter is huge! i sink mad putts!

  5. chowchow

    Nov 6, 2013 at 1:36 pm

    I listen to guys come in the shop WHINE about paying $299 for a putter, then turn around and drop $400 on a driver they hit crooked maybe 14 times around. If a guy shoots a stock 72 he will use the putter 36 times. Seems the $299 is better spent than on a $400 driver.

    Players pay for PUTTERS.. hacks waste big money on drivers.

    • Harry Dorton

      Nov 6, 2013 at 1:47 pm

      Not a bigger waste of money anywhere then scotty cameron putters. Get a 30 year old anser it will do same thing.

  6. Michael Weill

    Nov 6, 2013 at 1:21 pm

    Plenty of Newport 2 putters on ebay for around $229.

  7. Bill

    Nov 6, 2013 at 12:52 pm

    Impossible to justify the price of a “custom” Scotty. Lord knows what he’ll charge for a visit to his “public studio”. And when you consider the skill level of 99% of the golfing public, they be just as well off with a TGW discounted Odyssey or PING putter for $79.00! As for the tour pros? Well they don’t pay for their custom Scotty’s (most pros have several) AND more importantly, PGA tour players could putt better with a shovel than literally all amateurs putting with a $5,000 Circle T Scotty.

    • chowchow

      Nov 6, 2013 at 1:45 pm

      you are wrong on Pros don’t pay. Might try asking some about those free $2500 plus putters. Pros go to the Studio and they PAY for the fitting. Very few get freebees. Been to the studio twice. It is a tech envolved session dialing in a putter. Pros know that the putter is where the bread is made. Not wasting money on drivers. That is the difference between PLAYERS and the HACKS that hangout on blogs whaaaababying about the price of a putter but turn around and drop $400 plus on a driver they can’t hit straight or out of their shadows

      • Conrad MacDonald

        Nov 7, 2013 at 6:14 pm

        Actually most touring pros do get free circle t’s. I know multiple players personally on the champions web.com and pga tour canada and they all get access to free circle t’s. Also you dont need to go in to get fitted you can send in a request for one with your resume to scotty and he will decide (maybe not him personally?) if you are to get one.

      • KK

        Nov 14, 2013 at 12:52 am

        chowchow, from reading some of your other posts, it sounds like you work at a golf course or at least at a retail shop….so do I. I’m a terrible golfer and I don’t pay for much of my equipment; clothes, clubs, shoes, hats, I couldn’t tell you the last time I paid for balls, pretty much whatever I need within reason. It’s one of the many great things about working in the golf industry. Maybe you have inside information on tour players and what they pay for, but if I’m getting free stuff, I highly doubt Adam Scott or Jason Dufner asks Scotty Cameron for a putter and he says: “OK, here’s your custom putter, that will be $300.00.”

  8. Anthony Maccioli

    Nov 6, 2013 at 9:28 am

    So if it only the retail Scotty putters, what good will that do someone? They will find a putter for them but since they are so expensive will not be able to buy them. How bout making a putter more in the normal person’s price range instead of opening a new store?

    • Regular people buy Scotty's....

      Nov 6, 2013 at 5:48 pm

      How bout I’ll take the oppurtunity to get fitted by Scotty’s trained peeps, which have one how many? Or I should say who doesn’t win with a Scotty? PGA, LPGA, Senior, amateur, etc….the numbers speak for themselves…just like titleist has the monopoly of wins with balls. It’s on a smaller scale, but prov’s are pricey and no ones complaining, just as I’ve never heard someone say “this Scotty is garbage”…give me a rossa. May not be the right arrow for the scotty hater Indian, but can’t deny the quality of his work. So I’m unsure what a “normal person’s” putter price is, but I’ve got every bit of enjoyment outta of the Scotty’s I’ve played, and that’s fine as well if you wanna get kicked in your 2-balls leaving one short playing the minority of putters cause u wanted to save a few bucks to buy that disposable driver you change every six months, rather then spending on your moneymaker that will stick with you for a lifetime, or until you buy another Scotty:) Cheers!

  9. Mikey

    Nov 5, 2013 at 7:53 pm

    How about an east coast location? Oh well, I needed a reason to visit Cali anyway!

  10. Johnny

    Nov 5, 2013 at 11:40 am

    I’m hurtin’ for a squirtin’ from Cameron…

  11. Josh

    Nov 5, 2013 at 8:24 am

    the last push to squeeze every dollar out of the Cameron crazies…

  12. Billy

    Nov 5, 2013 at 12:07 am

    How much for a newport 2? Yay.

  13. bill

    Nov 4, 2013 at 9:11 pm

    I can only imagine the lines to get in that joint. It’ll be worse than the retail crawl at the Camarillo Coach Outlet Store that my wife subjects me to. Ugh! I’m sure Scotty staff will be passing out 30% off coupons as well!

  14. Jason

    Nov 4, 2013 at 8:23 pm

    This has been talked about for a while now in Titleist / Cameron circles. You will have access to some of the great fitting technology used by the Putter Studio.

  15. OverPriced!

    Nov 4, 2013 at 8:03 pm

    Just a place to see more merchandise. Not that there is anything wrong with that, but that is all we are looking at here. Titliest opens a new store…

    And there was much rejoicing….. Yea!

  16. Pingback: Scotty Cameron Opening a Public Putter Studio | Everything Golf

  17. froneputt

    Nov 4, 2013 at 6:43 pm

    Guys, it’s a putter, not a Picasso.

  18. Scott Chaffin

    Nov 4, 2013 at 6:06 pm

    This is great news. Keep it up Scotty!!

  19. Brand Me Silly

    Nov 4, 2013 at 5:36 pm

    Scotty thanks you for your loyalty, but if he catches you buying a different brand of putter he will banish you.

  20. Steve Barry

    Nov 4, 2013 at 5:09 pm

    Good scoop Zak, but didn’t Tiger use a Ping putter during his first Masters win? I thought the Cameron was in the bag for 13 of his 14, so it would only be 15 of the 16 combined majors for Roiger, or Tigoy, your choice.

    • thedurtydurden

      Nov 4, 2013 at 5:12 pm

      No, he used a Teryllium in his first Masters win, but it was the only major he won with that putter.

    • Ben Jackson

      Nov 4, 2013 at 5:14 pm

      Tiger used a Titleist/Scotty Cameron Teryllium Newport (Sole Stamp) in his win at the 1997 Masters.

      • Graig

        Nov 4, 2013 at 5:31 pm

        ….and it was a Newport 2 – Long Neck

        • Chuck

          Nov 5, 2013 at 10:17 pm

          No. It was a newport as mentioned above. He used a long neck very briefly but not to win the 97 masters….

      • chowchow

        Nov 6, 2013 at 1:38 pm

        and their was controvery over the length of the neck. Some of the putters had to have the cup cut down to USGA conforming specs. If you have a long cup.. you have a very rare putter

    • Jim

      Nov 5, 2013 at 2:02 am

      He used a Ping anser 2 in his U.S. Amateur wins.

  21. froneputt

    Nov 4, 2013 at 5:07 pm

    I wish it wasn’t Encinitas. I like Encinitas.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.

From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.

Specs/ Additional Details

-100% Milled, Aluminum/Bronze Alloy (310g)

-Original Anser Design

-PING PP58 Grip

-Putter is built to standard specs.”

To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes

Published

on

As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.

The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.

On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.

Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.

At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.

“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.

Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.

“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.

“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.” 

In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.

Not enough changes for you? There’s one more.

On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.

According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.

“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.” 

See Morikawa’s full WITB from the 2024 RBC Heritage here. 

Your Reaction?
  • 27
  • LEGIT2
  • WOW2
  • LOL4
  • IDHT2
  • FLOP3
  • OB3
  • SHANK2

Continue Reading

Equipment

Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage

Published

on

Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.

It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.

When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”

“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.

Here’s what Rietveld told GolfWRX.com on Wednesday:

“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.

“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.

“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.

“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.

“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”

So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.

His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.

See more photos of Rory testing the BRNR Mini here

Your Reaction?
  • 25
  • LEGIT2
  • WOW0
  • LOL2
  • IDHT0
  • FLOP0
  • OB1
  • SHANK3

Continue Reading

WITB

Facebook

Trending