Equipment
Photos of Titleist’s new Vokey SM5 wedges
The seeding process of Titleist’s Vokey SM5 wedges began this week at the Shriners Hospitals for Children Open, where PGA Tour players such as Charley Hoffman and Matt Jones were testing the fifth version of the company’s Spin Milled wedges.
The design of the SM5 wedges is similar to Vokey’s recently released Hand Ground wedges (click here to read our review of Hand Ground wedges), with fewer stampings on the back of the wedge. The changes include:
- A move of the phrase “Vokey Design,” which was featured on the flange of the SM4 wedges, to the hosel. In its place is now a description of the wedge grind, such as “F Grind,” “S Grind,” etc., adding emphasis to Vokey’s substantial stock grind options.
- The loft and bounce stampings have been moved from the back of the wedge to the sole. That allowed the “Titleist” and the “Bob Vokey wings” logos to be displayed in larger font on the back of the wedge, just as they were on the Hand Ground wedges.
Above: Matt Jones was testing a 54-degree SM5 wedge with an S Grind (10 degrees of bounce) and a “Tour Chrome” finish at the Shriners Hospital for Children Open.
Titleist is still mum on details of the SM5, but our insiders in the forums (thanks shootstill!) have shared these spy shots of the soon-to-be-released SM5 stock finishes.
Bob Vokey has repeatedly told the golf world that “bounce is your friend” when it comes to wedges, and he put his models where his mouth is with the SM5 line, turning a few low-bounce options into new mid-bounce options.
Editor’s note: When this story was first published, it included a spec sheet on the available lofts, bounces and finishes for the SM5 wedges. We were contacted by a Titleist official who said that the spec sheet was not a finalized document, and that several of the models listed were incorrect and/or not a true representation of what will be available when the wedges are released at the 2014 PGA Merchandise show.
The SM5 line will continue to offer Vokey’s popular “Tour Chrome” finish, but the “Oil Can” and “Black Nickel” finishes have been removed in favor of “Gold Nickel” and “Raw Black” models. According to several insiders in the forum, the SM5 will be sold for the same price as the SM4 wedges, $129.99.
Click here to see what GolfWRX Members are saying about the SM5 wedges in the forums.
- LIKE2
- LEGIT3
- WOW2
- LOL2
- IDHT2
- FLOP2
- OB2
- SHANK2
Equipment
Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage
Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.
It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.
When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”
“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”
View this post on Instagram
According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.
Here’s what Rietveld told GolfWRX.com on Wednesday:
“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.
“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.
“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.
“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.
“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”
So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.
His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.
See more photos of Rory testing the BRNR Mini here
- LIKE16
- LEGIT0
- WOW0
- LOL1
- IDHT0
- FLOP0
- OB0
- SHANK2
It seems like the RBC Heritage is full of new gear to be spotted, and you can add TaylorMade’s P-UDI utility irons to that list.
We spotted a 17-degree P-UDI 2-iron in Nick Dunlap’s bag yesterday, and now have some photos of both the 3- and 4-irons. Nick has his P-UDI 2-iron setup with a Project X HZRDUS Black 4th Gen 105g TX shaft.
From what we can tell, this new P-UDI utility iron looks to have some of the usual TaylorMade technology as we can see the Speed Slot on the sole of the club for additional face flexibility. A toe screw is usually used to close off the hollow body design that will probably be filled with a version of TaylorMade’s Speed Foam that is present in the current iron lineup. This hollow body, foam-filled design should offer additional ball speed, soft feel, and sound, as well as an optimized CG for ball flight.
“Forged” is etched into the hosel, so we can assume that either the face, body, or both are forged for a soft and responsive feel. The club looks good from behind and at address, where we can see just a little offset and a topline that I would consider medium thickness. We don’t have the full details on what is under the hood or how many loft options will be available yet.
TaylorMade P-UDI 3-iron – 20°
TaylorMade P-UDI 4-iron – 22°
- Check out the rest of our photos from the 2024 RBC Heritage
- LIKE12
- LEGIT1
- WOW2
- LOL0
- IDHT0
- FLOP1
- OB0
- SHANK1
- Collin Morikawa what’s in the bag accurate as of the RBC Heritage. More photos from the event here.
Driver: TaylorMade Qi10 LS (9 degrees)
Shaft: Mitsubishi Diamana D+ Limited 60 TX (45 inches)
3-wood: TaylorMade Qi10 (13.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
Irons: TaylorMade P770 (4), P7MC (5-6), P730 (7-PW)
Shafts: True Temper Dynamic Gold Tour Issue Mid 115 X100 (4-6), True Temper Dynamic Gold Tour Issue X100 (7-PW)
Wedges: TaylorMade MG4 (50-SB09, 56-LB08), TaylorMade MG4 TW (60-TW11)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: TaylorMade TP Soto
Grip: SuperStroke Zenergy Tour 2.0
Grips: Golf Pride Z-Grip Cord
Ball: TaylorMade TP5x
- LIKE4
- LEGIT0
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
Dave Portnoy places monstrous outright bet for the 2024 Masters
John Daly stuns fans into silence with brutal opening tee shot on PGA Tour Champions
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
Scottie Scheffler WITB 2024 (March)
Photos from the 2024 Arnold Palmer Invitational
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Two star names reportedly blanked Jon Rahm all week at the Masters
Joaquin Niemann names 3 PGA Tour events he’d love to play each year ‘in a perfect world’
Spotted: Bettinardi irons at the Arnold Palmer Invitational
Collin Morikawa WITB 2024 (April)
Collin Morikawa what’s in the bag accurate as of the RBC Heritage. More photos from the event here. Driver: TaylorMade...
WITB Time Machine: Jordan Spieth’s winning WITB, 2022 RBC Heritage
At the 2022 RBC Heritage Jordan Spieth defeated Patrick Cantlay on the first playoff hole after nearly holing his greenside...
Jason Day WITB 2024 (April)
Jason Day what’s in the bag accurate as of the RBC Heritage. Driver: Ping G430 LST (9 degrees @10) Shaft: TPT...
Ludvig Åberg WITB 2024 (April)
Ludvig Åberg what’s in the bag accurate as of the RBC Heritage. Driver: Titleist TSR2 (9 degrees, D4 SureFit setting)...
-
19th Hole1 week agoDave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks agoThings got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole1 week agoTiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks agoReport: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole3 days agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole3 days agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks agoAddiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
-
19th Hole2 weeks agoAnthony Kim says doctors told him that he ‘may not have much time left’ ahead of LIV return
fx mutation database
Aug 9, 2014 at 6:50 am
Next, we count how many pips away the top of the highest last 2 candles are, including the wick,
and add 5 pips. If we all had the answer to that, we could all make a living in the Forex market.
In the 1930s, an insane person wrote in a book called Mein
Kampf, “My Struggle,” and that was Adolf Hitler.
Gary Lewis
Mar 22, 2014 at 3:01 pm
Nice looking wedges, with a more rounded shape now. Sounds like some improvement in spin and there are quite a few shaft options. Will probably get a Gold 60.07 with an XP 95 shaft, no upcharge on that one.
Chuck
Feb 20, 2014 at 1:39 pm
I’m still using all of the pre-2011 Vokeys that I stockplied for use until 2024. It wasn’t just the groove rule; I preferred the old 200 series sand/lob wedges, and the 400 series gap wedges. Still do.
Now, is it just me (I’ve only seen pictures) or do the SM5’s look closer in shape to the 200 series? When Vokey went away from the 200 series, it seemed that his wedges started to look more like Clevelands. A more compact, upright shape. Less eloganted and teardrop shaped. I know that lots and lots of tour players insisted on the older model shapes. A number of devotess of the 400 series (Voke’s own favorite); and more 200 series than I could ever count. Is Vokey’s “world’s best R&D facility” telling him to go back to the 200 series shapes?
Pingback: Sticks & Greens | The Monday Match – Titleist Vokey SM4 Tour Chrome Wedge
rob
Oct 30, 2013 at 4:44 pm
well I hope to god they will start offering premium shafts like c taper the shaft in the sm4 was so bad I only used it for 18 holes before giving it away. Totally one of the worst clubs I ever used and all down to the cheap cheap shaft.
People need to demand more for Titleist and they should offer premium shafts if they claim to sell premium clubs.
Daniel
Nov 10, 2013 at 3:27 pm
they offer over 21 premium/upgrade shafts for sm4 including c-taper
and the “cheap cheap” shaft they have standard is a dynamic gold s200 which is the most played shaft on every tour around the world (maybe not that flex)
BC
Jan 10, 2014 at 4:27 pm
http://media.titleist.com/images/titleist/files/AU/pdf/2013_Australia_NZ_Custom_Club_Options.pdf
Rob
Jan 12, 2014 at 9:53 pm
Um, thanks for your opinion?? First of all, Titleist offered a Dynamic Gold wedge shaft in the SM4. I don’t know what kind of wedges you are using but almost every OEM retailer uses a very similar shaft as a stock option (with the exception of TaylorMade and a few Mizuno offerings). Also, you can order pretty much any shaft you want in a Vokey wedge. Educate yourself.
N
Mar 29, 2014 at 3:33 am
Who is this guy? I have a SM4 wedge that I got with a DG Spinner, which was one of many custom options available at the time. Please make sure you know the facts before posting your opinions.
Sam
Oct 22, 2013 at 1:46 pm
if i was to get the sm5’s could i get the raw black to rust and how? what is the date they get released
Deaus7
Oct 20, 2013 at 3:26 pm
I wonder what the James Patrick Titleist wedges will be like when they come out, I hope James keeps in tune with his original design and does not keep the Vokey style heads. The SM5 look great though. For those who complain about them not being forged dont know Metallurgy very well, 8620 is incredibly soft, and infact can be softer than 90% of the forgings out there. Look at a Rockwell Hardness scale.
Rob
Jan 12, 2014 at 9:54 pm
From what I have heard the JP wedges will be Japan only for the time being.. maybe a few boutique type offerings on wedge works in 2014 though?
Mike
Oct 18, 2013 at 4:12 am
I’m a Vokey fan and cosmetically I’m a little unimpressed.
I will probably take advantage of the cheaper SM4’s now.
My point is; I prefer the SM4 having bounce on the back 58.09 and looking a little more classic like the tradition of the old 252.12 200 series style and the biggie as mentioned… No oil can or raw? The gold may be the solution but to all intents I’m a little downbeat by these on first impressions.
Zachary yaz
Oct 18, 2013 at 10:55 am
completely agree. its almost just a cosmetic change nothing extreme. maybe more details will be revealed in due time.
Brian
Oct 18, 2013 at 5:47 pm
Technically the black is raw I think
KCCO
Oct 16, 2013 at 7:00 pm
Love simple graphics, new finishes are cool, and I’m sure they perform as well if not better than their predecessor sm4…
Chiver
Oct 29, 2013 at 11:21 pm
Chive on pal…. and yes I believe you are correct in that the performance standard has more than likely stayed the same or improved. My issue is paying for the latest and greatest and not being impressed by what (if any) changes they have made. We will see though. I have been kind of a gear flopper for the last two years and will be getting my hands on some new AP2s in a couple of weeks. Trying to make my golf bag look like something i can be proud of, and not want to upgrade for a while. Trying my best to stop buying so much. Hit em well my fellow chiver.
Fred
Oct 31, 2013 at 12:18 pm
Chiver – I think you’ve echoed the thoughts of a lot of us out there; I just purchased my MP-54s and, believe me, that’s it! No more equipment. lately, I’ve spent more time buying new equipment than I have in trying to become a better player. Think I’ll stick with sm4s – after all, in the end, it’s the indian, not the arrow. Right? Good post.
Paul
Oct 16, 2013 at 6:28 pm
Ehhh nice wedges but I’ll stick with my Nike V Forged.
Indexor
Oct 16, 2013 at 4:24 pm
I agree with Billy. While it is obviously personal preference I can also tell the difference between forged wedges and cast wedges. It is not just the feel but distance continuity, spin and ball flight. I switched from Vokeys to Mizunos and am very happy with the results for my game.
Paul
Oct 16, 2013 at 7:30 pm
If you the think the Mizuno wedges feel good just wait until you try the Miura wedges !
I had the Mizunos & kicked them to the curb for the Miura wedges .
I did have a set of SM4s before that and they felt to clicky for me .
chris
Oct 17, 2013 at 12:40 am
i love the mizuno mp 10’s.. feel like butter but they wear quick
David W
Oct 16, 2013 at 4:16 pm
Sweet, now I can start looking for price drops on the AWESOME SM4’s!
Zachary Yaz
Oct 16, 2013 at 2:41 pm
Remove the cosmetics and I really think it still looks like the sm4. Hope it still feels the same as my sm4’s cos I might as well just get a new set of sm4’s wedges for (hopefully) a lower price than a new set of sm5’s. Will
Have to hit a few when they are out. Hmmm. Not convinced.
Forged ier
Oct 17, 2013 at 7:51 pm
Man dont you know that vokey aren’t forged so they must feel like sh*t?
Zachary yaz
Oct 18, 2013 at 10:54 am
I actually know that they are not forged. but thats not always what makes the “feel factor”. if you prefer forged clubs then good for you. You must know more than me.
foreright!
Oct 16, 2013 at 2:24 pm
New finish and new bounce options, but still the same old technology. You’d think the biggest name in golf and the biggest name is wedges would actually do something better. Oh well, I’ll stick with my SCORs.
reets
Oct 16, 2013 at 3:40 pm
Maybe some slots in the sole or make them really colorful? That should give you about 300+ yards carry with a 60*. People have to realize that when you have something thats perfect you don’t need to change it.
SN
Oct 21, 2013 at 3:30 am
lol so true.
Maybe he just want 10+14+18 yards longer + adjustable hosel from his wedges.
Billy
Oct 16, 2013 at 2:20 pm
i’ll stick to FORGED wedges.
bull feathers
Oct 16, 2013 at 3:37 pm
HAHAHA can you really tell the difference? I bet if “FORGED” was engraved somewhere on there you would think its the best “feeling” wedge ever.
Billy
Oct 16, 2013 at 3:49 pm
yes
The "Voke" himself
Oct 17, 2013 at 7:41 pm
There are a lot of myths and misconceptions about cast vs. forged out there. Casting and forging are just processes. The feel of the wedge is determined by the metal used, not by the process. We cast the softest metal available, 8620 mild carbon steel. People think we cast our wedges because it’s cheaper. That’s not the case. It’s because of the number of grinds, lofts, bounces that we have available. We start with the Tour and when we find a shape or grind we really like, we’re able to make a tool for it quickly. The casting process is able to replicate the grind much closer than if we forged it. Think about this: 80 percent of the wedges on Tour are cast. I’ve never had a player come up to me and say, “Voke, this wedge doesn’t feel good. I really wish it was forged.” These are the best players in the world. And that’s my R&D department.
Joe
Oct 19, 2013 at 2:00 am
But they (vokey’s) still don’t feel good no matter what percentage of the tour uses.
Glenn dezan
Oct 26, 2013 at 5:42 am
And thats the end of that conversation!
DM
Jan 20, 2014 at 1:54 am
Joe just wont be quiet, jeeze. Come on.
neil
Oct 17, 2013 at 3:56 am
I have some beautiful forged Chakara wedges.
better than cast any day
Wang
Oct 17, 2013 at 7:49 pm
Do you mean Chikara?
JB
Oct 16, 2013 at 2:06 pm
52.12 F Grind, 58.07 S Grind. All in Black Raw!! Sign me up please!!! God those are gorgeous! The Gold Nickels are sweet too!! Any news on when they’ll be released to stores?
Brand Me Silly
Oct 16, 2013 at 2:02 pm
pass
Nick
Oct 16, 2013 at 1:59 pm
Wow. All 3 of my wedges they’ve eliminated for the lefties…46, 52.08 and 58.04…
Thats a shame.
Zak Kozuchowski
Oct 16, 2013 at 3:57 pm
That might not be true. We were contacted by a Titleist official that said those models could still potentially be available. The article has been updated to reflect those changes.
– Zak
John
Oct 16, 2013 at 1:39 pm
Looks good, like the new finished and like that they got rid of black nickel…I do wish they offered a raw finish (the absence of finish lol) but looks good
bl21
Oct 17, 2013 at 5:10 pm
Just get a maroon colored 3M Metal finishing pad at the store, it will take the black right off and make it raw.
George P.
Oct 16, 2013 at 12:55 pm
Wow! Love the raw black! Nice job!
Sky
Oct 16, 2013 at 12:46 pm
Man, those look sweet!