Connect with us

Equipment

Tech Talk: TaylorMade SpeedBlade irons

Published

on

Clank. It’s a sound golfers hate, and the main criticism of TaylorMade’s RocketBlades irons. But despite their awkward sound, the distance-happy RocketBladez irons sold like hotcakes and became the No. 1-selling iron in golf.

If it ain’t broke don’t fix it, right? Wrong. In true TaylorMade style, the company decided to revamp the construction of the new SpeedBlades irons, creating a set of clubs that not only feel better, but look and sound better as well.

The most noticeable structural change engineers made the design of SpeedBlade was removing the chunky toe section on the rear part of the club. That allowed them to place more weight lower and deeper in the head, which according to TaylorMade Product Creation Manager Brian Bazzel gives SpeedBlade the lowest center of gravity of any TaylorMade iron ever produced. The lower CG helps most with forgiveness on shots hit on the bottom part of the face, where Bazzel said 72 percent of golfers contact the ball.

[youtube id=”_k9unWck_wY” width=”620″ height=”360″]

Click here to read about the SpeedBlade iron launch at the BMW Championship.

300fb41ccaa2b9f1002933966cbe0bd552ff2c8a1bc0a2d0c55955a557c9385b

But again, SpeedBlade is a TaylorMade iron, and it’s not the company’s style just to make one change to a new product. The iron’s SpeedPocket, a slot in the sole of the iron, is now longer and wider than it was in the RocketBladez, particularly in the heel and toe sections. That allows the face to flex more on shots hit on those areas, enhancing ball speed to help mishits leave the face with a similar velocity as shots struck in the center.

The more important change to the SpeedPocket, however, is what golfers can’t see. The slot is extended all the way through the sole of the iron, as well as in three different spots on the back part of the irons to give the structure more flex. That creates a larger area of maximum spring-like effect, or a larger sweetspot. (Note: the SpeedPocket is only used in the design of the 3 through 7 irons, where Bazzel said it is most important for forgiveness and ball speed).

e080e12e349c0ce43af56b0f3d0e4028

Above: A SpeedBlade 6 iron at address. 

According to Bazzel, the lower CG and larger, more effective SpeedPocket allowed TaylorMade to make a change that most golfers will notice immediately: TaylorMade made them smaller. Adding to the compact look of the SpeedBlade is its new two-tone, satin-nickel-chrome finish with a dark smoke plating that creates more visual shrinkage at address. And yes, the combination of the new struction, dampening mechanism and SpeedPocket filler make the irons noticeably less harsh at address, turning the RocketBladez’s clank into more of a SpeedBlade smoosh.

The SpeedBlade irons will hit shelves on Oct. 4. They’ll cost $799 for eight irons with 85-gram proprietary steel shafts (R and S flexes), and $899 with 65-gram graphite shafts (L, M, R and S flexes).

Check out the spec of the new irons below, as well as more photos of the SpeedBlade irons and wedges in the gallery.

Screen Shot 2013-09-11 at 7.37.54 PM

Click here to see what GolfWRX members are saying about the SpeedBlade irons in the forum.

Click here to see what GolfWRX members are saying about the SpeedBlade irons in the forum.

Your Reaction?
  • 31
  • LEGIT6
  • WOW4
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK5

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

41 Comments

41 Comments

  1. james saden

    Apr 22, 2014 at 8:14 am

    Was wondering how durable the polymer in the speed pocket is. I don’t store my clubs in a climate controled environment. Is it affected by heat/cold? If the pocket fails wouldn’t the face deform? Only a two year warranty. $800 is a lot to spend. The clubs I am using now have lasted six years.

  2. Conrad

    Sep 17, 2013 at 2:49 pm

    man my 4 iron is 24 degrees loft. thats between a 5 and 6 speedblade…

    • Ola scholander

      Sep 18, 2013 at 11:30 am

      So? Whats important for you, loft ( number) or trajectory ( result) ?

      • Frank Garrett

        Sep 28, 2013 at 9:05 pm

        Flat bill hat is the most important to me

    • Frank Garrett

      Sep 28, 2013 at 8:37 pm

      Yea those guys at intech need to get with the times

  3. Ola

    Sep 15, 2013 at 9:22 am

    I dont get you guys. I hit higher and longer with these, with more control. Why should i not use them. The game is about least shots to get the ball in the hole. If you wanna use hogan edge irons from the late eighties, feel free to do so.

    Secondly, id like a company to release new stuff when they have improvents, not waiting 2 years to put them in. When i buy my new club i want the latest, dont want a 2 year old product

    • Frank Garrett

      Sep 28, 2013 at 8:35 pm

      Don’t forget to click in at your taylormade job monday

    • Frank Garrett

      Sep 28, 2013 at 9:04 pm

      2 things …..
      1st U couldn’t hit it high on the moon probably
      2nd. It don’t matter about the least amount of strokes
      u will still lie on the card

    • Kieran

      Feb 10, 2014 at 12:46 pm

      I didn’t know everyone on this forum worked for Golf Digest Magazine. WOW you guys should be the one reviewing the hot list.

      Diff golfers want diff equipment and something must be right with these if they made gold on the hot lit. I somebody wants to enjoy the game and easy too hit irons to give them most enjoyment go ahead and use these clubs so what if there cranked. who cares.

      I will see all you guys on the PGA tour then YES ? Oh no wait. Cowboys!!!

  4. Jay Randle

    Sep 15, 2013 at 12:34 am

    Taylor Made needs to stop…pretty weak offerings. I mean the best companies put out the least amount of equipment…read Mizuno, Titleist

    • NG

      Sep 19, 2013 at 1:13 am

      What makes these the best companies? FYI- TMaG iron share is 32%

    • Frank Garrett

      Sep 28, 2013 at 9:01 pm

      Really? Mizuno??? Is it April 1st already

  5. lloyd duffield

    Sep 13, 2013 at 4:46 pm

    it about time taylormade stopped messing around releasing new stuff every week and bring some decent forged irons out

    • Frank Garrett

      Sep 28, 2013 at 8:58 pm

      Come up with a catchy not-even-close name and they will

  6. paulmuehlboeck99

    Sep 13, 2013 at 3:42 pm

    I think Taylormade doesn´t help the sport. They bend down de lofts by 4 degrees and make the shafts longer by inches. That doesn´t make it easier to swing

    • Frank Garrett

      Sep 28, 2013 at 8:56 pm

      U keep playin those spalding blades from ’74 and tell me how that helps

  7. Bri-guy

    Sep 13, 2013 at 12:06 am

    Wow I just cannot wait until these things come out. Ill be the first to buy. I just love how Taylormade switched from the lime green to the blue, and changed the insert in the cavity a little and called it a speed blade. Trading in my rocketblades immediately. The fact it says speed blade means I have to gain some ball speed, right? Also, little will me buddies know that when I hit 2 less clubs than them, its really because my lofts are crazy strong. “Oh you hit a 7 iron from 165? I hit a 9 iron. I’m the man!” That is what I’ll be saying every Saturday. Also, I am so glad I did not pull the trigger on those ATV wedges. They were good when they were released 6 months ago or so, but these new speed blade wedges are so much better. Yea, they look like the same thing you may say to yourself, but you’d be wrong. These wedges are going to be bombers! SPEED and DISTANCE! Exactly what I want in a wedge. Distance control is so overrated. Thinking I will order a 89* wedge in these though for the 120 yard shots and in. I mean with how far these clubs go I’ll need something for those shorter shots.

    • MWP

      Sep 13, 2013 at 10:18 am

      oh my gosh bri-guy, I couldn’t agree more! But personally, I just cannot wait until they come out with the “speedbladez” putter! I mean i just can’t ever hit my putts fast enough or far enough! hopefully they’ll make some type of putter with a speed grove on the bottom so i can putt better. if they do, how could I not become a PGA Professional?!

      And the really good news is that I ONLY use mallet putters. And since taylormade LOVES calling things bladez when they aren’t blades….. im sure the speedbladez putter will come as a mallet!!!! Oh man, gonna go work some overtime so I can save up for that bad boy when they release it.

      • paulmuehlboeck99

        Sep 13, 2013 at 3:42 pm

        you´re defenetly right man

      • Frank Garrett

        Sep 28, 2013 at 8:53 pm

        I think the putter will be an old skool l/r putter…. It’s gonna be called switchblade

      • Hyoga

        Oct 1, 2013 at 3:54 am

        Thank you bri-guy and MWP, you made my day.

    • virgil

      Feb 9, 2014 at 2:48 pm

      Hilarious

  8. Mitch

    Sep 12, 2013 at 11:16 pm

    ill go find a stick and a rock in my backyard… tie them thangs together and call it the new and improved “twigzblades” and i’m starting to think somebody would buy them.

    • Frank Garrett

      Sep 28, 2013 at 8:50 pm

      Tell me where I can find the specs

    • Frank Garrett

      Sep 28, 2013 at 8:51 pm

      What’s the kick point of the stick

      • Mitch

        Nov 7, 2013 at 12:09 pm

        Kickpoint: No kickpoint, its a pretty thick stick

        Loft: rock

        Lie: rock

        Length: 76″

        Distance: infinite

  9. JHM

    Sep 12, 2013 at 11:05 pm

    USGA Museum has a set of Ben Hogan’s irons. His 5 iron measured 37 inches and 30 degrees. Now that’s a 7 iron.

    • Frank Garrett

      Sep 28, 2013 at 8:49 pm

      Why don’t u post something about his driver being smaller than current ones

  10. Jack

    Sep 12, 2013 at 11:04 pm

    I might have to see how much better these are over my AP2s, which I love.

    • Frank Garrett

      Sep 28, 2013 at 8:48 pm

      Yea I love my fingers stinging after I hit the ball too

      • Ryan

        Oct 1, 2013 at 1:19 pm

        Don’t really feel like you should blame the guy above you for your inability to hit irons half decently…

  11. corey

    Sep 12, 2013 at 1:10 pm

    a 17 degree 3 iron? slapping the number 3 on a 1 iron wont make it any easier to hit

    • Frank Garrett

      Sep 28, 2013 at 8:47 pm

      If youre complaining now just wait for 3 yrs when tm busts out negative loft long irons

  12. Tim

    Sep 12, 2013 at 10:40 am

    Does anyone else find it weird that whenever equipment companies release new equipment, they always have somehow found a way to lower the CG and enlarge the sweetspot (enlarge the speed pocket in this case)? It’s even more disturbing that we, the naive consumers, will pay MSRP to purchase new equipment that’s so much better than the one before.

    • Frank Garrett

      Sep 28, 2013 at 8:30 pm

      Yea I have …. I think the cg of drivers gotta be outside the clubhead by now….. But I read a few weeks ago that they move it 1 milimeter

  13. Jay

    Sep 11, 2013 at 10:28 pm

    Any word on when the SpeedBlade Tour model will be released?

    • Frank Garrett

      Sep 28, 2013 at 8:41 pm

      Probably a week before speedierbladez come out

    • Andrew Cain

      Oct 8, 2013 at 10:47 am

      TaylorMade Rep states Feb 2014 for Tour version

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Daniel Berger WITB 2024 (April)

Published

on

  • Daniel Berger what’s in the bag accurate as of the Farmers Insurance Open. More photos from the event here.

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 7 X

6-wood: TaylorMade Qi10 Tour (21 degrees)
Shaft: Fujikura Ventus Black 8 X

Irons: TaylorMade P770 (3), TaylorMade Tour Preferred MC 2011 (4-PW)
Shafts: Project X Denali Blue 105 TX (3), Project X 6.5 (4-PW)

Wedges: Titleist Vokey Design SM9 (50-12F), Titleist Vokey Design SM10 (56-14F), Callaway Jaws Raw (60-08C)
Shafts: Project X 6.5 (50), True Temper Dynamic Gold Tour Issue S400 (56, 60)

Putter: Odyssey Ai-One Jailbird Mini DB
Grip: SuperStroke Zenergy PistolLock 1.0

Grips: Golf Pride Tour Wrap

Ball: Titleist Pro V1

Check out more in-hand photos of Daniel Berger’s clubs in the forums.

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT0
  • FLOP0
  • OB1
  • SHANK0

Continue Reading

Equipment

Heavy Artillery: A look at drivers in play at the Zurich Classic of New Orleans

Published

on

What are the driver and shaft combinations of the best golfers in the world? For gearheads, it’s an endlessly interesting question — even if we can only ever aspire to play LS heads and 7 TX shafts.

At this week’s Zurich Classic of New Orleans, GolfWRX got in-hand looks at the driver setups of a wealth of players.

Check out some of the most interesting combos below, then head to the GolfWRX forums for the rest, as well as the rest of our galleries from New Orleans.

Rory McIlroy

Driver: TaylorMade Qi10 (9 degrees @8.25)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride MCC

Alex Fitzpatrick

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride MCC

Daniel Berger

Driver: Ping G430 LST (10.5 degrees @9)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride Tour Wrap

Rasmus Hojgaard

Driver: Callaway Paradym Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX
Grip: Golf Pride MCC

Alejandro Tosti

Driver: Srixon ZX5 Mk II LS (9.5 degrees @10.5)
Shaft: Project X HZRDUS T1100 75 6.5
Grip: Golf Pride MCC Plus4

James Nicholas

Driver: Titleist TSR3 (8 degrees, A1 SureFit setting)
Shaft: Fujikura Ventus TR Blue 7 X
Grip: Golf Pride Tour Velvet

Kevin Streelman

Driver: Titleist TSR3 (10 degrees, D1 SureFit setting)
Shaft: Fujikura Ventus TR Black 6 X
Grip: Golf Pride Tour Velvet

Sang-moon Bae

Driver: Callaway Paradym Triple Diamond (9+ @8)
Shaft: Fujikura Ventus Blue 6 X
Grip: Golf Pride Tour Velvet

Russ Cochran

Driver: Callaway Paradym Ai Smoke (9 degrees)
Shaft: Graphite Design Tour AD TP 6 X
Grip: Golf pride MCC Align 

MJ Daffue

Driver: Callaway Paradym Ai Smoke Max (10.5 degrees @9.5)
Shaft: Project X HZRDUS Smoke Green RDX 65 TX
Grip: Golf Pride ZGrip Cord Align

Check our more photos from the Zurich Classic here.

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Whats in the Bag

Rasmus Højgaard WITB 2024 (April)

Published

on

  • Rasmus Højgaard what’s in the bag accurate as of the Zurich Classic.

Driver: Callaway Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX

3-wood: Callaway Ai Smoke Triple Diamond Prototype (16.5 degrees)
Shaft: Mitsubishi Tensei 1K White 80 TX

Utility: Callaway Apex UW (21 degrees)
Shaft: Mitsubishi Tensei AV Raw White 85 TX

Irons: Callaway Apex Pro (3), Callaway X Forged (4-PW)
Shafts: KBS $-Taper 130

Wedges: Callaway Jaws Raw (52-10S, 56-10S, 60-06C)
Shafts: KBS Tour 130 X

Putter: Odyssey Ai One Milled Eight T DB

Grips: Golf Pride MCC

Check out more in-hand photos of Hojgaard in the forums.

 

Your Reaction?
  • 3
  • LEGIT1
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending