Connect with us

Equipment

Products you need to know from the 2012 PGA Show

Published

on

By Zak Kozuchowski

GolfWRX Managing Editor

Big product releases are usually the draw at the PGA Merchandise Show, but there were a few lesser known products that generated a lot of buzz at this year’s event. Here’s three products you need to know about from the 2012 PGA Merchandise Show.

SCOR

Industry standards for iron lofts have gotten stronger in recent years. Yet wedge loft offerings have stayed nearly the same, leaving golfers with a problem. They don’t have a pitching wedge any more.

“Companies haven’t been making pitching wedges for a long time,” said Terry Koehler, president of SCOR Golf.

For that reason, SCOR produces a line of clubs with lofts from 41 degrees to 61 degrees, which the company hopes will help golfers fill the gap that stronger short irons create in their bags. To make things even easier on golfers, SCOR wedges are offered in only one sole grind, the company’s V Sole.

“We don’t believe in different options on grind,” Koehler said. “We build a low bounce into the main part of the sole so it will work from tight lies, and a very aggressive bounce in the leading edge so that it will perform from soft lies. The idea of custom grinding a sole for the vast variety of lies you could face in any given round of golf to me is pretty hard … your lies change continually. (Wedge designers) talk about fitting your sole to your swing type, well if you’re a really good player you vary your swing type for the kind of shot you’re trying to hit, and if you’re an average to poor player you’re not really sure what your swing type is going to be from swing to swing.”

The custom built golf clubs will be available at select fitting centers across the country, and  start at $149 for an individual wedge.

I hit the 44 degree model (the same loft as my Miura CB-202 9-iron) on the range, and was impressed with the club’s more compact profile and lower trajectory on full shots. On chips and pitches, the V grind proved very versatile, and was definitely an improvement over my 9 iron on smaller shots.

Swiftwick

SwiftWick socks were featured in our GolfWRX last minute holiday gift guide past because of the huge following the sock company gained on the PGA Tour in win 2011. At this year’s PGA Merchandise Show, I finally had the opportunity to don the company’s much hyped socks.

I squeezed my size 12s into Swiftwick’s Vibe Zero sock on Friday for day No. 3 of frantic coverage and the endless walking required from a GolfWRX staff member. The first thing I noticed was how snugly the socks fit around my heel.

All of Swiftwick’s socks are seamless, and constructed at a 200-needle standard, which means they provide compression throughout the entire sock without any friction points. My aching feet were immediately rejuvenated, like I was being given a foot massage as I walked the floor. My feet also felt cooler inside my sweat saturated Ecco Street golf sneakers. Since the fabric wasn’t slipping, my feet felt much more stable inside my shoe, a feeling that later translated into more stability in my golf swing.

The Vibe line is a litter thicker than Swiftwick’s thinnest socks, the Aspire line. And while I’m not usually a fan of thin socks, but I loved the feel of the Vibe and the Aspire, which I later sampled.

It wasn’t long before I returned to the Swiftwick booth for the Aspire 12s, a knee-high length sock that I hoped would give my ankles and calves the same treat mean my feet had just received. While I was there, I also picked up Swiftwick’s Performance Sleeves, which I thought was one of the most thoughtful products at the 2012 PGA Merchandise Show.

I wasn’t disappointed by the performance of the Aspire 12s, and during testing days later I found Swiftwick’s sleeves to be perfect for cold weather practice sessions. The sleeves fit snugly from just above the elbow to the wrist, and provided warmth and compression without the straight jacket feeling of multiple layers and compression shirts. Like Swiftwick’s Aspire, Vibe and Performance sock lines, the sleeves are made of Olifin, a naturally moisture wicking fabric, which makes them playable in warmer weather conditions as well.

My personal favorite product from Swiftwick, however, is the company’s Pursuit sock line, which is constructed completely of merino wool. The socks cost a little more than the other models and are the thickest socks the company produces.

Swiftwick gives cotton socks a swift kick in the behind. Prices range from $9.99 a pair to $34.99 for the knee-high 12s. The sleeves are $24.99.

Putting Alley

The Putting Alley training aid is going to make you a better putter.

It works like this.

1. You place your ball in a small depression on one end of the 27-inch training aid.

2. You try to putt the ball down the raised surface without having it fall off.

3. You practice, and miss fewer short putts.

Check out the video below with Putting Alley Vice President of Sales, Tim Maloney. I couldn’t pull out my credit card fast enough to get mine.

Click here for more discussion in the forums

Want to write for GolfWRX? Click here for more information.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

3 Comments

3 Comments

  1. Court

    Feb 2, 2012 at 9:56 pm

    Good choices on the wedges and the Putter Alley. The wedges feel great and the Putter Alley is kind of fun. Didn’t see the socks, but they look interesting.

  2. Tim Maloney

    Jan 31, 2012 at 10:51 pm

    David I think you missed one of the main points or differences from a ruler. On a ruler you bend over hit the putt and chase after the ball and repeat the process. Also you hope your ruler is flat and on a flat surface. On the Putting Alley the ball returns and can be self loaded with out bending over or chasing it. Also our product guarantee’s a flat surface on our alley and has two levels of precision. We know you can get more quality practice putts on our device than the ruler. Also the price is worth more than a sore back. Give it a try, I’m sure you’ll be convinced and like the product.

  3. David Reid

    Jan 31, 2012 at 7:13 pm

    I have been teaching golf for 25 years. I have used an aluminum meter stick as a similar putting aid. $4.95 at wal-mart!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Putter Roundup: 2024 Zurich Classic of New Orleans

Published

on

We always get some great photos of some phenomenal putters at tour events and love to share them. Here are a few from the 2024 Zurich Classic that caught our eye and seemed interesting. (And as a reminder, you can check out all our photos from New Orleans here)

MJ Daffue’s Scotty Cameron T-11 Prototype

MJ is going with the new Scotty Cameron T-11 Prototype this week. The putter is a multi-piece mallet that puts an emphasis on stability with the wings on the back. Daffue’s putter does have a design that differs from retail with a monotone finish, which eliminates the black paint on the aluminum parts that we see at retail. He also has a half siteline milled into the top and an L-neck welded on for some additional toe hang. The face features a deeper milling that should offer a softer feel and slightly quieter sound.

Scotty Cameron T-7.5 Prototype

We spotted a few different Scotty Cameron Phantom models with modified rear flanges. It looks like the straight black flange was cut into a half circle for a little softer look at address. On this T-7.5, you can still see the raw aluminum from the back view, so this might have been a last-minute job to get them out on tour. The semi-circle also has a white line on it, maybe to frame the ball differently.

Alex Fitzpatrick’s Bettinardi SS16 DASS

Alex’s SS16 is made from Bettinardi’s famous D.A.S.S., or double-aged stainless steel, for a softer and more responsive feel. The face has a unique diamond pattern milling and features a logo that I feel like I have seen before, but can’t put a name to. The putter is a classic mid-mallet style with a simple, single white siteline on the top. The sole is clean with just the SS16, DASS, and a green triangle logo on it.

Steve Stricker’s Odyssey White Hot No. 2

This putter has made some amazing putts in its long career! Stricker’s White Hot No. 2 might be in the top 10 of most famous putters in golf. When you see all the dents and lead tape, you know the heel will be up and it will be sinking putts! The soft White Hot insert looks to be in good shape and has less wear on it than the rest of the putter. We don’t know how much lead tape is on the sole, but it has to be multiple layers compacted down over the years.

Doug Ghim’s Scotty Cameron T-7 Prototype

This T-7 should win the award for “best color finish” in this list with its deep chromatic bronze. It looks like Scotty added a cherry bomb dot to the heel of the deep-milled face and filled it with a very dark blue paint. The rest of the putter looks pretty stock with its single site line on the topline and twin site lines down the “fangs” of the putter. Twin 5-gram weights are installed in the sole and the putter is finished off with a gloss black double bend shaft with a fill shaft offset.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Spotted: Project X Denali hybrid shaft

Published

on

Project X’s Denali wood shafts have been seen in more and more golf bags this year as we start off the season. As a refresher, Denali Blue is the mid-launch and mid-spin model while Denali Black is for players seeking lower launch and spin.

Denali combines great feel with stability and increased ball speed. Currently, Project X only offers Denali Blue and Black in wood shafts, but we spotted a hybrid shaft in Daniel Berger’s bag at the 2024 Zurich Classic.

The shaft looks to be a Denali Blue 105G – HY in TX flex. No word on details from Project X yet but we can assume that this is a mid-launching shaft that weighs around 105 grams in Tour X-Stiff flex.

Berger has this shaft in his TaylorMade P770 3-iron, likely for some added launch and spin to hold the green from longer distances.

Hopefully, this means we will see some more shafts coming under the Denali name in the future, as I think many of us would like to try one in a hybrid or utility iron!

 

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Daniel Berger WITB 2024 (April)

Published

on

  • Daniel Berger what’s in the bag accurate as of the Farmers Insurance Open. More photos from the event here.

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 7 X

6-wood: TaylorMade Qi10 Tour (21 degrees)
Shaft: Fujikura Ventus Black 8 X

Irons: TaylorMade P770 (3), TaylorMade Tour Preferred MC 2011 (4-PW)
Shafts: Project X Denali Blue 105 TX (3), Project X 6.5 (4-PW)

Wedges: Titleist Vokey Design SM9 (50-12F), Titleist Vokey Design SM10 (56-14F), Callaway Jaws Raw (60-08C)
Shafts: Project X 6.5 (50), True Temper Dynamic Gold Tour Issue S400 (56, 60)

Putter: Odyssey Ai-One Jailbird Mini DB
Grip: SuperStroke Zenergy PistolLock 1.0

Grips: Golf Pride Tour Wrap

Ball: Titleist Pro V1

Check out more in-hand photos of Daniel Berger’s clubs in the forums.

Your Reaction?
  • 4
  • LEGIT0
  • WOW1
  • LOL1
  • IDHT0
  • FLOP0
  • OB1
  • SHANK0

Continue Reading

WITB

Facebook

Trending