While Royal Collection is not a completely unknown name on the US and European Tour, the products that it made as the now defunct Sonartec brand enjoyed one of the strongest and most loyal followings of any manufacturer.As Royal Collection, it continues to be one of the most dominant brands on the Japanese Tour.
Best known for their fairway woods and hybrids, Royal Collection also make a full range of clubs, drivers, irons, putters and wedges like the 6150 TG. Royal Collection tell us that this is a super soft forged wedge with a Tour inspired grind that looks and plays great, offering remarkable versatility and controllable bounce from any lie. Bag Chatter got to see exactly how good these are.
RC 6150 TG
With a classic teardrop head, this is a wedge that sits very well behind the ball. Compared to the better known OEM wedges, the 6150 is most similar to a Vokey 200 series wedge but with a fractionally straighter leading edge and a noticeably thinner topline. The QPQ (Quench Polish Quench) matte black finish is excellent and prevents any hint of glare and makes the ball look large and inviting to hit, despite the delicacy of the head. The finish is exceptionally durable and refuses to scratch up – over a month of testing hardly made any impression in the finish. The wide grooves and deep face-milling indicates that this wedge has the performance to back up its looks and the marked B/H sole grind (B – trailing edge grind and H – a grind that removes material from the heel section) indicates that real thought has gone into how this club is supposed to perform.
Bucket loads of spin. The grooves and face-milling combine to grab the ball even on short chips so you have to remember to be that little bit more aggressive else risk leaving it short as the ball sits down so fast. This serious spin also allows point and shoot on pitching and fuller shots, and flop shots that do stop where they drop. It’s also impressive that the grooves do not shred the ball any where near as much as you would think given the amount of spin generated.
As mentioned above, the high spin gives superb control as you can target your landing area in the knowledge that the ball is not going to be rolling out too far. The standard trajectory is lower than standard wedges as the ball comes off the face strong and with plenty of spin. The sole grind means that the better player has many more options on what they want the ball to behave both in trajectory and spin although with the grooves and face milling doing their stuff, bump and run shots are pretty much out of the equation.
While it might not be the softest wedge around, it ain’t that far off it and the feel of the head is complemented by the quality grip and the option of either Dynamic Gold S200 or NS Pro 950GH. While the grip is Royal Collection branded, it’s top quality and pleasingly tactile. It’s interesting to know that to keep the swing-weight the same at D2-D4, the Nippon shafted version comes 1/2 inch longer and even in extra-stiff flex the feedback that comes through the NS Pro shaft is immense.
Those who use the Utley method for chipping and pitching will love the freedom available with these heads. The grind is versatile enough to be able to present the full loft at impact for precision pitching off almost any turf conditions but you are also able to get the hands in front when delofting the club for chipping without excavating up great clods of earth. The medium-high bounce also allows you a bit of freedom if you have a tendency to hit fat shots as it resists digging. The heel and trailing edge grind lower the front edge both when the face addresses the ball normally and also when it is opened up but the high bounce makes it too much to attempt lobs on tight or bare lies.
Special mention should be made of how well this wedge performs in the sand. Of course that is no such thing as a wedge that will make getting up and down out of a bunker easy for everyone but the combination of bounce and the sole grind on the 6150 allows you to navigate the treacherous sands with great confidence.
The demise of Sonartec left many golfers wondering where they would be able to find clubs that allowed them to play the game the way they wanted. The awareness that almost the entire Sonartec range were re-badged Royal Collection clubs along with the increasing availability of Royal Collection will mean that this is a brand that will be seen more and more and with wonderful clubs like the 6150TG you’ll know why.
For more information, visit www.madeinjapangolf.com/
In-Depth Review: Titleist Vokey SM6 Wedges
Pros: A new, progressive CG design helps the low-lofted wedges fly a few yards farther, and improves the feel of the high-lofted wedges while boosting consistency. With lofts from 46-62 degrees and five distinct grinds, most golfers will be able to find an SM6 wedge that works for them.
Cons: At $149, they’re $20 more expensive than SM5 models.
Who they’re for: All golfers.
- Price: $149 (MAP)
- Lofts: 46, 48, 50, 52, 54, 56, 58, 60, 62
- Grinds: F (46-56), S (54-60), M (54-62), L (58-60), K (58-60)
- Finishes: Tour Chrome (plated), Steel Gray (plated) and Jet Black (QPQ)
- Stock Shaft: True Temper Dynamic Gold S200
- Construction: Cast (8620 carbon steel)
A glance at Vokey’s new SM6 wedges reveals that something is different. Some golfers will understand the science of why the wedges look like they do, but many won’t. Unlike a lot of new golf club technologies, however, golfers won’t need to be in the know to be impressed. I don’t talk about the “cool factor” in many of my reviews, but the SM6 wedges certainly have it.
Those curves on the back of the SM6 wedges? They create what’s called a progressive center of gravity (CG), which means the weighting of the SM6 wedges varies based on loft. The lowest-lofted SM6 wedges (46-52 degrees) have the lowest CG, the mid-lofted wedges (54, 56 degrees) have a higher CG and the highest-lofted wedges (58-62 degrees) have the highest CG. The three different CG positions match the desired impact area on each wedge’s club face — lower-lofted wedges are generally contacted lower on the face, while higher-lofted wedges are generally contacted higher on the face — to improve trajectory, feel and consistency.
Low-Lofted SM6 Wedges
If you’ve ever wished your Vokey 46-, 48-, 50- or 52-degree wedge flew a little farther, SM6 models will. Vokey says the low-lofted SM6 wedges create about 1.5 mph more ball speed and 3-4 yards more distance, and I buy their claim after testing SM6 wedges that were built to the same specs as my SM5 models on Foresight GC2.
“Distance doesn’t matter with wedges,” you might be saying, and you’re correct in theory. Who cares if your gap wedge goes 110 or 113 yards, as long as you hit it a consistent distance. That’s not the issue, though. Improvements in golf equipment technology have irons flying farther than they ever have, which means more golfers need a club — and maybe even two clubs — between 46-and-52 degrees to bridge the gap between their shortest iron and mid-or-high-lofted wedge.
I’m one of those golfers who needs two wedges to fill the gap. I use a 9 iron that measures 41 degrees and carries about 150 yards. I also use a 54-degree wedge (bent to 55 degrees) that carries about 105 yards. I fill the gap with a 46-degree wedge (bent to 45 degrees) that carries about 135 yards. I prefer its look and feel to the pitching wedge from my iron set because I can vary trajectory more easily with it. I also carry a 50-degree wedge that carries about 120 yards.
An issue I had with the SM5 wedges (46-08 F Grind, 50-08 F Grind) is the same one I’ve always had with other low-lofted wedges. Many times when I tried to hit them a little harder to make them go a few yards farther, they didn’t. Shots often just went higher due to excess spin. I’ve seen countless golfers experience this problem, especially better players.
The biggest improvement to the low-lofted SM6 wedges is that they create a more iron-like ball flight. It’s slight, but their faster trajectory is a little bit less likely to balloon. To me, they also feel slightly softer than the SM5’s at impact.
Probably just as important as the new progressive CG design of the low-lofted SM6 wedges is something that isn’t new — the different bounce options Vokey offers in its 50- and 52-degree wedges. Both the 50- and 52-degree models are offered in F Grinds with effective bounce angles of 8 and 12 degrees. Most manufacturers offer multiple bounce options in their mid- and high-lofted models, but it’s rare to see two different options in low-lofted models.
In July 2015, I traveled to Titleist’s Oceanside, California Test Facility to learn more about the company’s 716 iron line. During the downtime, Titleist offered me an opportunity to be fit for SM5 wedges by the man himself, Bob Vokey. My steeper angle of attack theoretically made me a better fit for the 50-12 F Grind (a 50-degree wedge with 12 degrees of effective bounce), but my results were better with the 50-08 F Grind.
Vokey explained that the reduced bounce helped me contact the ball slightly higher on the face, and that improved my ball flight. That moment cemented how important it is for golfers to be fit for not just their lob wedge, but for as many of their wedges as possible.
Mid-Lofted SM6 Wedges
The mid-lofted SM6 wedges (54 and 56 degrees) are most similar to the SM5 models, as they do not have the weight pads used in the low-lofted and high-lofted wedges. That’s because, according to Vokey representatives, the CG of the mid-lofted wedges was pretty much where it needed to be.
For that reason, the biggest change golfers will notice if they switch to an SM6 from an SM5 is the shaping. Unlike the low-lofted SM6 wedges, which are significantly smaller than SM5 models and have shorter hosels, the mid-lofted SM6 wedges are roughly the same size. There’s no denying, however, that the shaping of the SM6 wedges gives them a more streamlined look. Their toes are more rounded, their top lines are thinner and their par area, the part of a wedge’s top line that conjoins with the hosel, blends more seamlessly.
I’ve given my SM5 and SM6 54-14 F Grind wedges (bent to 55 degrees) to several golfers and had them hit shots with each one to see if they could notice a different in feel. Some told me the SM6 felt softer, while others told me the SM5 felt softer. For that reason, its hard to make an absolute statement about a change in feel in the mid-lofted wedges. I’ve had a few golfers tell me the SM5 wedges look better at address, but many more have preferred the look of the SM6.
Before moving on to the high-lofted wedges, I want to point out two more things; one is specific to the mid-lofted models, one that is not.
- Like SM5 models, both the 54 and 56 are available in three different grinds (F, S and M). For the SM6 line, however, the popular M Grind has 2 degrees less effective bounce to make it more versatile from a wider variety of lies.
- All SM6 wedges also feature Vokey’s new TX4 grooves, which use a machine-milled, parallel face texture that Titleist says can increase consistency and sharpens groove edges to add as much as 200 rpm of spin. The SM6 wedges also use the same progressive groove design as the SM5 wedges. The lower-lofted wedges (46-54) use narrower, deeper grooves to displace more debris on square-face shots, while higher-lofted wedges (56-62) use shallower grooves that create more friction on open-face shots.
High-Lofted SM6 Wedges
With a slightly higher CG, the high-lofted SM6 wedges do seem to launch shots slightly lower and with a little more spin than SM5 models, and that’s exactly what most better players want their high-lofted wedges to do. But the change likely won’t be noticed by the majority of golfers. What they will notice, however, is how much better the high-lofted SM6 wedges feel at impact. Every golfer has experienced the “clank” that occurs when a wedge shot is hit too high on the face, or toward the heel or toe at impact. With the high-lofted SM6 wedges, those shots felt softer and more solid.
Due to their higher CG, the high-lofted wedges also seemed to be a little more consistent in my testing on Foresight. Especially when hitting 50-yard shots, I saw that the 60-degree SM6 M Grind wedge seemed to land a little closer my target on mishits. Sometimes it flew 1-2 yards farther than I expected when I contacted a shot slightly on the toe or the heel; sometimes shots just held their line just a little bit better. The difference is small, but can make an difference. We’re all better at making 6-foot putts than we are 9-footers, aren’t we?
As for shaping, the new wedges don’t look the same as the SM5’s at address. They appear slightly larger, and have the same general appearance as the other wedges in the new line.
No discussion of a Vokey high-lofted wedge is complete without mentioning their four distinct sole grinds, which Team Vokey continues to tweak based on its work with Tour players, as well as average golfers. Despite the several improvements to the new wedges, the grinds continue to be one of their main selling points. That’s how powerful using the proper sole grind can be.
Again, it’s best to get fitted, but if you can’t, the chart and list below offers a few starting points.
- If you struggle from the sand, try the K Grind (available in 58, 60). It has the widest sole of any Vokey wedge, and can work well for golfers with steep attack angles. Compared to SM5 K Grind wedges, it has 1-degree more effective bounce to help the wedge better resist digging on square-face shots.
- If you play courses with extremely firm turf conditions, try the L Grind (available in 58, 60). It has the lowest effective bounce (4 degrees), and slightly more camber than SM5 models to goflers resist digging.
- The M Grind (available in 54, 56, 58, 60, 62) will work best for golfers who like to manipulate the face open or closed, while the S Grind (available in 54, 56, 58, 60, 62) is better for golfers who tend to play more square-faced shots. The 58 and 60-degree S Grind wedges have 3-degrees more bounce than SM5 models.
Vokey Custom Options
As noted above, I don’t use a standard SM5 wedge. At Oceanside, Vokey fit me for a V-Grind that’s offered through the company’s Hand Ground Program. According to Titleist representatives, Hand Ground SM6 wedges, which make available Tour-only grinds and enhanced customization options — will be released to the public at a later date.
Do I really need a V-Grind wedge? I must admit, with a little practice I could probably use the SM6 M Grind and hit all the shots I need to hit. But I liked the performance V Grind enough to pay the extra money for it (Hand Ground wedges start at $350 each).
For golfers not willing to pay that much for a completely custom wedge, Vokey offers more affordable custom options to standard SM6 wedges through its WedgeWorks Services. Through the program, golfers can customize the shafts, grips, shaft bands, ferrules, stampings and paintfill of their wedges. I’ve had several wedges customized through WedgeWorks, and the work is always A++.
Should you Upgrade?
If you’re currently using a set of properly fit SM5 wedges, your transition from them to the SM6 models should be an easy one. Many golfers will see certain benefits from the newer wedges, as I did, but they may or may not warrant an immediate upgrade, especially if their grooves are still fresh.
An aside about buying wedges: Many tournament players purchase two sets of wedges at a time. They practice with one set and use another on the golf course, which keeps their grooves as fresh as possible for tournaments. While it doubles cost, it helps their gamer wedges last longer and adds peace of mind that they’re getting the best possible performance from their wedges on the course.
What else do you want to know? I’ll do my best to answer your questions in the comments section.
Review: Callaway MD3 Milled wedges
Pros: Options are plentiful with the MD3 Milled wedges. There are three different sole grinds, two finishes and a wide range of lofts (46-60 degrees). Low-lofted, mid-lofted and high-lofted wedges are each equipped with a distinct groove design that’s tailored to shot-specific needs.
Cons: Wedge heads are not able to be customized with stampings, engravings or paint fill. Unlike Callaway’s Mack Daddy 2 wedges, the MD3 Milled are not forged.
Who they’re for: Anyone can play the MD3 Milled wedges, especially with the addition of the wider-soled “W Grind.”
- Lofts available: 46, 48, 50, 52, 54, 56, 58 and 60 degrees
- Grinds: S Grind (46-60), W Grind (54-60), C Grind (56-60)
- Finishes: Matte Black (46-60) and Satin Chrome (46-60)
- Price: $129.99
- Stock Shaft: True Temper Dynamic Gold S300
New and improved are popular terms in the golf equipment world, but generally there’s more emphasis on the “new” part than the “improved” part. Fortunately, what’s new about Callaway’s MD3 Milled wedges also offers noticeable improvements over previous models from the company.
So what’s new and improved about the MD3 Milled wedges? Here are five things to know about them.
Throwing weight around
Each MD3 Milled wedge has four colored ports in its rear cavity. Weight was removed from those areas to give the wedges a higher-toe design that moves the center of gravity (CG) higher for a slightly lower launch and more spin — exactly what the best golfers want from their wedge shots.
For me, it wasn’t the fact I could hit the 58.9 S Grind with as much spin as I wanted; it was the ease with which I was able to alter the trajectory. With the 54.12 W Grind, I had no problem hitting the ball high to front pin locations, or flighting shots that minimized the effect of the wind.
With the MD3 Milled, Callaway offers three specific groove patterns to optimize launch and spin based on the loft of the wedge. Pitching and gap wedges (46-52 degrees) have Callaway’s 30V grooves, which have 30-degree side walls that perform best on the more aggressive, downward strikes that are common with the clubs. Mid-lofted wedges (54-56 degrees) use Callaway’s 20V grooves, which have 20-degree side walls that excel on bunker shots and full swings. Lob wedges (58-60 degrees) have Callaway’s 5V grooves, which create maximum spin on shots around the green.
In testing, I was most impressed with the 5V groove, which does a remarkable job moving additional moisture and debris away from the ball. That came in quite handy when navigating juicy lies around the green.
More refined grinds
The MD3 wedges are available in three distinct sole grinds: S Grind, C Grind and W Grind. My thoughts on each are below.
S Grind: The “S” is the most versatile of the three available grinds. I’m tempted to say that S stands for “Swiss Army Knife,” as there was no shot I couldn’t hit with the grind. It was the most consistent grind on full swings from the fairway and tight lies, and more than held its own out of both light and deep rough. There’s no doubt that the S Grind will fit the majority players, and there’s absolutely nothing wrong with bagging the S Grind in two, three or four different wedges, depending on your bag setup.
C Grind: This grind offers more heel and toe relief than the S Grind, creating an effectively thinner sole that excels in firmer conditions. While it doesn’t play nice with steep angles of attack, the additional relief in both the heel and toe did keep the head moving through the rough and allowed the leading edge to sit nicely under the ball at address — especially on open-faced shots. That adds versatility for golfers who hit a lot of specialty shots around the green.
W Grind: The W Grind is ideal for bunker play, messy lies and players with steep attack angles. It was my favorite grind, because it seemed to get better the closer I got to the hole. Out of both light and deep rough, the W Grind operated like one of those old ginsu knives, but without the lame sales pitch. Getting up and down from gnarly lies around the green felt entirely too easy. And if the lie was clean and the turf was on the softer side, I had no problem hitting aggressive shots with a square or opened club face because I knew the wider sole would resist digging. Especially on less-than-full shots from inside 100 yards, the W Grind quickly earned the go-to spot in my bag.
The MD3 Milled’s Matte Black finish (above) will wear and rust over time, while the Satin Chrome, which is plated, will show less wear but produce slightly more glare on sunny days.
Although the MD3 Milled wedges aren’t forged — they’re cast from 8620 steel — both finishes felt fantastic with an edge in softness going to the Matte Black.
Looks to get emotional about
Last but not least, the MD3 Milled are an awesome choice if you favor a teardrop shape at address. In that regard, the MD3 Milled approaches aesthetic perfection. The slightly raised toe and marginally straighter leading edge, compared to previous models, gives the wedge a clean look that balances angular lines with subtle curves.
For all the time we spend looking at the face of the wedge, many golfers are concerned about the appearance of the club as it sits in the bag. Some will call the cavity of the MD3 Milled is a bit gaudy, but others will see the four luminescent ports and green accents as fun and recognizable.
The MD3 Milled are the best production wedges Callaway has released in the past decade for a variety of reasons. At $129.99, the three distinct grinds and two finish options should cover the needs of most interested golfers. The shaping of the wedges is also so beautiful at address, and I found them to look and feel as good as leading wedge models.
The lack of custom options — stampings, paintfill, etc — isn’t a deal breaker, but does leave some room for improvement. At the end of the day, however, wedges should judged on how they perform. With an improved weighting scheme and loft-specific grooves, Callaway put performance first with the MD3 Milled and it won’t go unnoticed.
Review: 4 things to know about Ping’s Glide wedges
Designing a wedge is complicated, but falling in love with one is simple. And I fell hard for Ping’s new Glide wedges within a matter of weeks, a feeling that hasn’t faded in the months since. I found that there’s simply no shot I can’t pull off with a Glide wedge, and fitting one to your game is as simple as it gets in today’s complex wedge marketplace.
Are you shopping for a new wedge? Here are four things to know about Ping’s Glide.
The Simple (and Awesome) Sole Grinds
The Glide wedges are offered in three different “sole grinds,” a term that describes the shape of the sole of the club. Choosing the best sole grind for your game is the most important part of buying a new wedge. Choose the right one, and you’ll gain more confidence around the green. Choose the wrong one, and you’ll feel like you’re running a race in shoes that don’t fit.
Some sole grinds are more versatile than others, and Ping’s Standard Sole, or SS Grind, on its Glide wedges is one of the most versatile grinds on the market.
I tested four SS Grind wedges (47, 52, 56 and 60 degrees) in several different areas of the country with different turf conditions — from the deserts of Arizona to the plush turf of Michigan — and didn’t once wish I had a different grind.
The Glide wedges are also available in a Wide Sole, or WS Grind, which is for golfers who play golf courses with very soft conditions or those who have steeper angles of attack (AoA). For those not familiar with advanced golf swing lingo, a steep AoA generally leads to big divots.
On the other end of the spectrum is the Thin Sole, or TS Grind, which is for one of three kinds of golfers:
- Those who play courses with very firm conditions
- Those who have a very shallow AoA.
- Those who want maximum versatility around the greens, as the TS Grind has the narrowest sole and the lowest effective bounce.
The three grinds are very distinct, so if you test all three there’s little chance that you’ll choose the wrong one. Trust your gut, but there’s a high probability that you’ll prefer the SS Grind.
The Soft Feel (and Forgiveness)
Cast wedges like the Glide can scare away golfers who are particular to the feel of forged wedges. And it’s true that there are cast wedges on the market that don’t feel great — but the Glide wedges aren’t one of them.
The Glide wedges are cast from a 431 stainless steel that’s softer than the 17-4 stainless steel used to make their predecessors, Ping’s Tour Gorge wedges. They also have a redesigned thermoplastic elastomer Custom Tuning Port (CTP) that is positioned behind the impact area to dull bad vibes.
The biggest benefit of the Glide’s cast, multi-material construction, however, is not feel but forgiveness. Some golfers might say that they’re not looking for increased forgiveness in a wedge, but I say, “Why not?” The Glide wedges are roughly the same size and shape of other leading wedges at address, with the benefit of a bit of perimeter weighting that you won’t notice until you need it.
When I hit a shot slightly off center with the Glide wedges — particularly the 47- and 52-degree models — the results were slightly better than the blade-styled wedges I’ve played in the past.
Impressive Custom Options
Remember the Custom Tuning Port (CTP) I mentioned a few paragraphs ago? It serves the dual purpose of improving the feel of Ping’s irons and wedges, and also helps the company dial in the swing weight of custom orders.
Ping made the Glide’s swing weight, a measurement of the balance point of a golf club, lighter than previous models. The stock 60-degree model, for example, has a swing weight of D4. The decision was based on a study of golf’s greatest wedge players, which showed that many of them used lob wedges that were often lighter than the standard D5-D6 swing weight.
I wanted to try lighter wedges, too, so I made a difficult request. At 0.5 inches over standard, which usually pushes swing weight into the D6-D9 range, I wanted my wedges to have a swing weight of D3. Ping nailed it.
Ping’s famous WRX department (no relation) can handle a variety of custom requests. For more information, contact Ping.
A Hands-Down Approach
As I mentioned in my tech story on the Glide wedges that was published January, Ping made small tweaks to nearly every aspect of the new wedges. Some were subtle, such as the loft-optimized grooves and chrome-plated finish that both create slightly more spin. Others were more noticeable, such as a new CFS wedge shaft and Ping’s Dylawedge grip, which is 0.75 inches longer than a standard grip to encourage golfers to “choke down” on the club for more control.
The takeaway for interested buyers? With the Glide wedges, Ping covered all its bases and created a well-rounded line that offers golfers plenty of loft and grind options without overly complicating the fitting process. Maybe you won’t like the Glide wedges as much as I do, but harsh criticism of the Glide wedges will be rooted in personal preference — not performance.
If you’re looking for a wedge that achieves high marks in every meaningful category — looks, feel, spin and versatility — these are one of your top choices. And if you like the sound of a little extra forgiveness, the Glide is it.
Paige Spiranac blasts golf culture: “A big boys club” that is “elitist, stuffy and exclusive”
Looking back on a golf genius: Anthony Kim (with final full bag specs)
Patrick Reed’s winning WITB: 2020 WGC-Mexico Championship
Sergio Garcia WITB 2020
Phil Mickelson WITB 2020
Viktor Hovland’s winning WITB 2020 Puerto Rico Open
Dustin Johnson WITB 2020
Sungjae Im’s winning WITB: The Honda Classic
Bubba Watson WITB 2020
Rickie Fowler WITB 2020
WITB Time Machine: Phil Mickelson WITB, 2016 Waste Management Phoenix Open
Equipment is accurate as of the Waste Management Phoenix Open (2016). Driver: Callaway XR 16 Sub Zero (8.5 degrees) Shaft:...
Byeong Hun An WITB 2020
Equipment accurate as of the Farmers Insurance Open Driver: Titleist TS3 (8.5 degrees, B2 SureFit setting) Shaft: Accra TZ5 M5...
Pat Perez WITB 2020
Equipment accurate as of the Farmers Insurance Open. Driver: PXG 0811X Gen 2 (9 degrees) Shaft: Aldila Rogue Black 130...
Adam Long WITB 2020
Equipment accurate as of the 2020 Players Championship. Driver: TaylorMade SIM Max (9 degrees) Shaft: Project X HZRDUS Smoke Green...
News2 weeks ago
Looking back on a golf genius: Anthony Kim (with final full bag specs)
Whats in the Bag3 weeks ago
Bubba Watson WITB 2020
Equipment6 days ago
Phase 1 vs. P7TW: An inside look at Tiger Woods’ TaylorMade irons
Equipment2 weeks ago
Today from the Forums: “3-hybrid or 7-wood?”
Opinion & Analysis1 week ago
Behind the numbers: A road map for an 18 handicap to get down to a 9
Equipment1 week ago
Building the perfect half set
Whats in the Bag3 weeks ago
Tommy Fleetwood WITB 2020
Whats in the Bag2 weeks ago
Steve Stricker WITB 2020